Combustion characteristics analysis of a free-piston engine generator coupling with dynamic and scavenging

被引:77
作者
Yuan, Chenheng [1 ]
Feng, Huihua [2 ]
He, Yituan [1 ]
Xu, Jing [1 ]
机构
[1] Chongqing Jiaotong Univ, Coll Traff & Transportat, Chongqing 400074, Peoples R China
[2] Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China
关键词
Free-piston diesel engine; Combustion characteristics; Piston motion; Coupling simulation; Scavenging; MIXED LUBRICATION REGIME; SIMULATION; RING; PARAMETERS;
D O I
10.1016/j.energy.2016.02.131
中图分类号
O414.1 [热力学];
学科分类号
摘要
Free-piston engine generator is an unconventional engine, which abandons the crank and connecting rod mechanism. This paper focused on a numerical simulation for the research on the combustion characteristics of a free-piston diesel engine generator. An iteration numerical simulation method was presented by adopting coupled models of zero-dimensional dynamics, multidimensional scavenging and combustion. According to the coupled parameters of these models, the effects of the piston motion on combustion process were investigated compared with a corresponding traditional crank engine. The results indicate that compared with the conventional engine, the free-piston engine generator has a longer combustion duration due to its faster piston mean velocity in combustion process. While the heat release before top dead center, the isochoric heat release, and the heat release during the premixed combustion period both were lower than the traditional engine, and the post-combustion became more intense for the free-piston engine, thus a slight disadvantage of indicated efficiency was found. In addition, the in-cylinder average gas temperature and pressure were generally lower than the traditional engine, which contribute to the distinct advantages in NO discharge of the free-piston engine generator. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:637 / 649
页数:13
相关论文
共 35 条
[1]  
Achten P.A., 1994, SAE T, P1836
[2]   Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part II - Correlation with bench test data [J].
Akalin, O ;
Newaz, GM .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2001, 123 (01) :219-223
[3]   Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part I - Analytical results [J].
Akalin, O ;
Newaz, GM .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2001, 123 (01) :211-218
[4]  
Bergman M, 2008, 2008012423 SAE
[5]  
Bergman M, 2006, JSAE ANN C P, V51-06
[6]  
CARTER D, 2003, 2003013277 SAE
[7]  
Casba TN, 2004, LINEAR ENGINE DEV SE
[8]   A computational and experimental study of the scavenging flow in the transfer duct of a motored two-stroke cycle engine [J].
Creaven, JP ;
Kenny, RG ;
Fleck, R ;
Cunningham, G .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2001, 215 (D9) :1017-1031
[9]   Research on combustion process of a free piston diesel linear generator [J].
Feng, Huihua ;
Guo, Chendong ;
Yuan, Chenheng ;
Guo, Yuyao ;
Zuo, Zhengxing ;
Roskilly, Anthony Paul ;
Jia, Boru .
APPLIED ENERGY, 2016, 161 :395-403
[10]  
Fredriksson J.B.M., 2006, 2006010449 SAE