A Fundamental Investigation of Gas/Solid Heat and Mass Transfer in Structured Catalysts Based on Periodic Open Cellular Structures (POCS)

被引:36
作者
Ferroni, Claudio [1 ]
Bracconi, Mauro [1 ]
Ambrosetti, Matteo [1 ]
Maestri, Matteo [1 ]
Groppi, Gianpiero [1 ]
Tronconi, Enrico [1 ]
机构
[1] Politecn Milan, Dipartimento Energia, Lab Catalysis & Catalyt Proc, I-20156 Milan, Italy
基金
欧洲研究理事会;
关键词
DIRECT NUMERICAL-SIMULATION; PRESSURE-DROP; THERMAL-CONDUCTIVITY; FOAMS; FLOW; REACTORS; STRUT; CFD; OXIDATION; SUPPORTS;
D O I
10.1021/acs.iecr.1c00215
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
In this work, we investigate the gas-solid heat and mass transfer in catalytically activated periodic open cellular structures, which are considered a promising solution for intensification of catalytic processes limited by external transport, aiming at the derivation of suitable correlations. Computational fluid dynamics is employed to investigate the Tetrakaidekahedral and Diamond lattice structures. The influence of the morpho-logical features and flow conditions on the external transport properties is assessed. The strut diameter is an adequate characteristic length for the formulation of heat and mass transfer correlations; accordingly, a power-law dependence of the Sher-wood number to the Reynolds number between 0.33 and 0.67 was found according to the flow regimes in the range 1-128 of the Reynolds number. An additional -1.5-order dependence on the porosity is found. The formulated correlations are in good agreement with the simulation results and allow for the accurate evaluation of the external transfer coefficients for POCS.
引用
收藏
页码:10522 / 10538
页数:17
相关论文
共 59 条
  • [51] Generalized correlations for mass transfer and pressure drop in fiber-based catalyst supports
    Reichelt, Erik
    Jahn, Matthias
    [J]. CHEMICAL ENGINEERING JOURNAL, 2017, 325 : 655 - 664
  • [52] Additive manufacturing of periodic ceramic substrates for automotive catalyst supports
    Santoliquido, Oscar
    Bianchi, Giovanni
    Eggenschwiler, Panayotis Dimopoulos
    Ortona, Alberto
    [J]. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2017, 14 (06) : 1164 - 1173
  • [53] Analysis of the mass transfer controlled regime in automotive catalytic converters
    Santos, H.
    Costa, M.
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (1-2) : 41 - 51
  • [54] Comparison of forced convective heat transfer between pillar and real foam structure under high Reynolds number
    Sun, Mingrui
    Li, Man
    Hu, Chengzhi
    Yang, Lei
    Song, Yongchen
    Tang, Dawei
    Zhao, Jiafei
    [J]. APPLIED THERMAL ENGINEERING, 2021, 182
  • [55] Characterization of a porous medium employing numerical tools: Permeability and pressure-drop from Darcy to turbulence
    Teruel, Federico E.
    Rizwan-uddin
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (25-26) : 5878 - 5888
  • [56] ADEQUACY OF LUMPED PARAMETER MODELS FOR SCR REACTORS WITH MONOLITH STRUCTURE
    TRONCONI, E
    FORZATTI, P
    [J]. AICHE JOURNAL, 1992, 38 (02) : 201 - 210
  • [57] Structured catalysts for non-adiabatic applications
    Tronconi, Enrico
    Groppi, Gianpiero
    Visconti, Carlo Giorgio
    [J]. CURRENT OPINION IN CHEMICAL ENGINEERING, 2014, 5 : 55 - 67
  • [58] Fundamentals and applications of structured ceramic foam catalysts
    Twigg, Martyn V.
    Richardson, James T.
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2007, 46 (12) : 4166 - 4177
  • [59] 3D printing of polymer matrix composites: A review and prospective
    Wang, Xin
    Jiang, Man
    Zhou, Zuowan
    Gou, Jihua
    Hui, David
    [J]. COMPOSITES PART B-ENGINEERING, 2017, 110 : 442 - 458