A Fundamental Investigation of Gas/Solid Heat and Mass Transfer in Structured Catalysts Based on Periodic Open Cellular Structures (POCS)

被引:40
作者
Ferroni, Claudio [1 ]
Bracconi, Mauro [1 ]
Ambrosetti, Matteo [1 ]
Maestri, Matteo [1 ]
Groppi, Gianpiero [1 ]
Tronconi, Enrico [1 ]
机构
[1] Politecn Milan, Dipartimento Energia, Lab Catalysis & Catalyt Proc, I-20156 Milan, Italy
基金
欧洲研究理事会;
关键词
DIRECT NUMERICAL-SIMULATION; PRESSURE-DROP; THERMAL-CONDUCTIVITY; FOAMS; FLOW; REACTORS; STRUT; CFD; OXIDATION; SUPPORTS;
D O I
10.1021/acs.iecr.1c00215
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
In this work, we investigate the gas-solid heat and mass transfer in catalytically activated periodic open cellular structures, which are considered a promising solution for intensification of catalytic processes limited by external transport, aiming at the derivation of suitable correlations. Computational fluid dynamics is employed to investigate the Tetrakaidekahedral and Diamond lattice structures. The influence of the morpho-logical features and flow conditions on the external transport properties is assessed. The strut diameter is an adequate characteristic length for the formulation of heat and mass transfer correlations; accordingly, a power-law dependence of the Sher-wood number to the Reynolds number between 0.33 and 0.67 was found according to the flow regimes in the range 1-128 of the Reynolds number. An additional -1.5-order dependence on the porosity is found. The formulated correlations are in good agreement with the simulation results and allow for the accurate evaluation of the external transfer coefficients for POCS.
引用
收藏
页码:10522 / 10538
页数:17
相关论文
共 59 条
[1]   Open-cell foams as catalysts support: A systematic analysis of the mass transfer limitations [J].
Aguirre, A. ;
Chandra, V. ;
Peters, E. A. J. F. ;
Kuipers, J. A. M. ;
D'Angelo, M. F. Neira .
CHEMICAL ENGINEERING JOURNAL, 2020, 393
[2]   Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials [J].
Al-Ketan, Oraib ;
Rowshan, Reza ;
Abu Al-Rub, Rashid K. .
ADDITIVE MANUFACTURING, 2018, 19 :167-183
[3]   Packed Periodic Open Cellular Structures - an Option for the Intensification of Non-Adiabatic Catalytic Processes [J].
Ambrosetti, Matteo ;
Groppi, Gianpiero ;
Schwieger, Wilhelm ;
Tronconi, Enrico ;
Freund, Hannsjoerg .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2020, 155
[4]   Packed foams for the intensification of catalytic processes: assessment of packing efficiency and pressure drop using a combined experimental and numerical approach [J].
Ambrosetti, Matteo ;
Bracconi, Mauro ;
Maestri, Matteo ;
Groppi, Gianpiero ;
Tronconi, Enrico .
CHEMICAL ENGINEERING JOURNAL, 2020, 382
[5]   Analytical Geometrical Model of Open Cell Foams with Detailed Description of Strut-Node Intersection [J].
Ambrosetti, Matteo ;
Bracconi, Mauro ;
Groppi, Gianpiero ;
Tronconi, Enrico .
CHEMIE INGENIEUR TECHNIK, 2017, 89 (07) :915-925
[6]   Analysis of laminar flow across a triangular periodic array of heated cylinders [J].
Asif, Mohd. ;
Dhiman, Amit .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (07)
[7]   Periodic open cellular structures (POCS) as enhanced catalyst supports: Optimization of the coating procedure and analysis of mass transport [J].
Balzarotti, Riccardo ;
Ambrosetti, Matteo ;
Arnesano, Mauro ;
Anglani, Alfredo ;
Groppi, Gianpiero ;
Tronconi, Enrico .
APPLIED CATALYSIS B-ENVIRONMENTAL, 2021, 283
[8]   On the implementation of stream-wise periodic boundary conditions [J].
Beale, Steven B. .
HT2005: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE 2005, VOL 2, 2005, :771-777
[9]   Assessment of Periodic Open Cellular Structures for Enhanced Heat Conduction in Catalytic Fixed-Bed Reactors [J].
Bianchi, Enrico ;
Schwieger, Wilhelm ;
Freund, Hannsjoerg .
ADVANCED ENGINEERING MATERIALS, 2016, 18 (04) :608-614
[10]   Catalytic partial oxidation of methane on rhodium and platinum: Spatial profiles at elevated pressure [J].
Bitsch-Larsen, A. ;
Horn, R. ;
Schmidt, L. D. .
APPLIED CATALYSIS A-GENERAL, 2008, 348 (02) :165-172