Chaos in the unbalance response of a rigid rotor in cavitated squeeze-film dampers without centering springs

Numerical investigation on the unbalance response of a rigid rotor supported by squeeze-film dampers without centering springs revealed some complex bifurcation features that have not been previously reported in the literature. With the variation of the unbalance parameter (U), the period-1 solution was found to undergo a sequence of period-doubling bifurcations that eventually resulted in chaotic motion. The existence of a period-3 solution, which formed a closed bifurcation curve consisting of a pair of saddle nodes, was for the first time observed in such a system. The chaotic attractor arising from the period-doubling cascade of the period-1 solution, which was observed to co-exist with the period-3 attractor in a narrow range of U values, was eventually annihilated in a collision with the unstable period-3 orbit in a boundary crisis. Similar to the bifurcations of the period-1 solution, the period-3 solution was also found to bifurcate into solutions of period-6 and period-12, which eventually led to chaotic motion. A chaotic attractor was also observed to co-exist with a period-4 orbit. The period-4 orbit was found to undergo a sequence of reverse period-doubling bifurcations resulting in a large amplitude period-1 orbit. The occurrence of non-synchronous and chaotic motion in rotating machinery is undesirable and should be avoided as they introduce cyclic stresses in the rotor, which in turn may rapidly induce fatigue failure. The magnitude of rotor unbalance where non-synchronous and chaotic motion were observed in this study, although higher than the permissible unbalance level for rigid rotating machinery, may nevertheless occur with in-service erosion of the rotor or in the event of a partial or-an entire blade failure. (C) 2001 Elsevier Science Ltd. All rights reserved.