High-precision determination of lithium and magnesium isotopes utilising single column separation and multi-collector inductively coupled plasma mass spectrometry

RationaleLi and Mg isotopes are increasingly used as a combined tool within the geosciences. However, established methods require separate sample purification protocols utilising several column separation procedures. This study presents a single-step cation-exchange method for quantitative separation of trace levels of Li and Mg from multiple sample matrices. MethodsThe column method utilises the macro-porous AGMP-50 resin and a high-aspect ratio column, allowing quantitative separation of Li and Mg from natural waters, sediments, rocks and carbonate matrices following the same elution protocol. High-precision isotope determination was conducted by multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS) on the Thermo Scientific NEPTUNE Plus fitted with 10(13) amplifiers which allow accurate and precise measurements at ion beams 0.51V. ResultsSub-nanogram Li samples (0.3-0.5ng) were regularly separated (yielding Mg masses of 1-70g) using the presented column method. The total sample consumption during isotopic analysis is <0.5ng Li and <115ng Mg with long-term external 2 sigma precisions of 0.39 parts per thousand for Li-7 and +/- 0.07 parts per thousand for Mg-26. The results for geological reference standards and seawater analysed by our method are in excellent agreement with published values despite the order of magnitude lower sample consumption. ConclusionsThe possibility of eluting small sample masses and the low analytical sample consumption make this method ideal for samples of limited mass or low Li concentration, such as foraminifera, mineral separates or dilute river waters.