RETRACTED: Recent development in friction stir processing of aluminum alloys: Microstructure evolution, mechanical properties, wear and corrosion behaviors (Retracted Article)

被引：31

作者：

Bagheri, Behrouz ^{[1
]}

Abdollahzadeh, Amin ^{[2
]}

Sharifi, Farzaneh ^{[3
]}

Abbasi, Mahmoud ^{[1
,4
]}

Moghaddam, Ahmad Ostovari ^{[5
]}

机构：

[1] Amirkabir Univ Technol, Dept Min & Met, Tehran, Iran

[2] Shahid Chamran Univ Ahvaz, Fac Engn, Dept Mat Sci & Engn, Ahvaz, Iran

[3] Sch Mech & Mat Engn, Pullman, WA USA

[4] Univ Kashan, Fac Engn, Kashan, Iran

[5] South Ural State Univ, Chelyabinsk, Russia

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING | 2021年

关键词：

Aluminum alloy; friction stir processing; friction stir vibration processing; surface composite; mechanical properties; wear; corrosion; MATRIX COMPOSITES; SURFACE; VIBRATION; NANOCOMPOSITE; PARTICLES;

D O I：

10.1177/09544089211058007

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, the effect of mechanical vibration with reinforcement particles namely Silicon Carbide (SiC) on microstructure, mechanical properties, wear, and corrosion behaviors of aluminum alloy surface composites fabricated via friction stir processing (FSP) was investigated. The method was entitled friction stir vibration process (FSVP). The results revealed that recrystallized fine grains formed in all processing samples as a result of dynamic recovery and recrystallization, while samples processed in friction stir vibration processing resulted in better grain refinement in the stir zone than in conventional friction stir processing. Compared to conventional friction stir processing, in friction stir vibration processing, the hardness and tensile strength increased due to microstructure modification and better reinforcing distribution. From corrosion analysis, the corrosion resistance of the friction stir vibration processed samples showed a significant increase compared to the friction stir processed specimens. The wear results indicated that the wear resistance of friction stir vibration processed specimens is higher than friction stir processed specimens due to the development of smaller grains and a more homogenous distribution of the strengthening particles as the vibration is applied.

引用

页数：13

共 48 条

[31] Fabrication of SiC particle reinforced composite on aluminium surface by friction stir processing [J].

Mahmoud, E. R. I. ;

Ikeuchi, K. ;

Takahashi, M. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2008, 13 (07) :607-618

[32] Effect of Friction Stir Processing on the Microhardness, Wear and Corrosion Behavior of Al6061 and Al6061/SiO2 Nanocomposites [J].

Mazaheri, Yousef ;

Heidarpour, Akbar ;

Jalilvand, Mohammad Mahdi ;

Roknian, Masoud .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (08) :4826-4837

[33]

McCafferty E., 2010, IEEE Transactions on Circuits Systems, DOI [DOI 10.1007/978-1-4419-0455-3, 10.1007/978-1-4419-0455-312]

[34] Effect of multi-pass friction stir processing on the microstructure, mechanical and wear properties of AA5083/ZrO2 nanocomposites [J].

Mirjavadi, Seyed Sajad ;

Alipour, Mohammad ;

Hamouda, A. M. S. ;

Matin, Abdolhamid ;

Kord, S. ;

Afshari, Behzad Mohasel ;

Koppad, Praveennath G. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 726 :1262-1273

[35] Friction stir welding and processing [J].

Mishra, RS ;

Ma, ZY .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2005, 50 (1-2) :1-78

[36] Friction stir processing of aluminium alloy AA7075: Microstructure, surface chemistry and corrosion resistance [J].

Pang, J. J. ;

Liu, F. C. ;

Liu, J. ;

Tan, M. J. ;

Blackwood, D. J. .

CORROSION SCIENCE, 2016, 106 :217-228

[37] Development of multi-pass processed AA6082/SiCp surface composite using friction stir processing and its mechanical and tribology characterization [J].

Prabhu, Sivanesh M. ;

Perumal, Elaya A. ;

Arulvel, S. .

SURFACE & COATINGS TECHNOLOGY, 2020, 394

[38] Manufacture of biodegradable magnesium alloy by high speed friction stir processing [J].

Qin, Dingqiang ;

Shen, Haorui ;

Shen, Zhikang ;

Chen, Haiyan ;

Fu, Li .

JOURNAL OF MANUFACTURING PROCESSES, 2018, 36 :22-32

[39] Effects of Recycled Powder on Solidification Defects, Microstructure, and Corrosion Properties of DMLS Fabricated AlSi10Mg [J].

Rafieazad, M. ;

Chatterjee, A. ;

Nasiri, A. M. .

JOM, 2019, 71 (09) :3241-3252

[40] Revealing the relationship between grain size and corrosion rate of metals [J].

Ralston, K. D. ;

Birbilis, N. ;

Davies, C. H. J. .

SCRIPTA MATERIALIA, 2010, 63 (12) :1201-1204

← 1 2 3 4 5 →