Characterization of laminate sandwiched with stainless steel and glass fibre

被引：14

作者：

Choudary, Malepati Vineeth ^{[1
]}

Nagaraja, A. ^{[1
]}

Sai, Kesarla Om Charan ^{[1
]}

Balasubramanian, M. ^{[1
]}

机构：

[1] RMK Coll Engn & Technol, Tiruvallur, Tamil Nadu, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 22卷

关键词：

Stainless steel; Composite; GFRP; Flexural strength; Wire mesh; MECHANICAL-PROPERTIES;

D O I：

10.1016/j.matpr.2019.11.030

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The most noteworthy use of composite materials is seen in structural components for air craft's. In this investigation, a laminate of glass fibre reinforced with stainless steel wire mesh is used. Corrosion resistance, less elongation at high tension and high flexibility are the features of stainless steel fibre. The mechanical properties of the laminates were strengthened with steel wire mesh and studied for their performance. Tensile, compressive and flexural tests were carried out on glass fibre/stainless steel hybrid composites to understand the behaviour of the composite. Three-point bend test was carried out on those specimens to evaluate the flexural strength and flexural modulus. It has been observed that the reinforcement of stainless-steel wires has significant impact on the mechanical properties of the sandwiched laminates. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：847 / 852

页数：6

共 15 条

[1] An experimental study on mechanical properties of GFRP braid-pultruded composite rods [J].

Ahmadi, M. S. ;

Johari, M. S. ;

Sadighi, M. ;

Esfandeh, M. .

EXPRESS POLYMER LETTERS, 2009, 3 (09) :560-568

[2]

[Anonymous], 2014, INT J RES ADVENT TEC

[3] Evaluation of delamination damage in carbon epoxy composites under swirling abrasives made by modified internal threaded nozzle [J].

Balasubramanian, M. ;

Madhu, S. .

JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (06) :819-833

[4]

GuruRaja M.N., 2013, J. Miner. Mater. Charact. Eng, V01, P231, DOI DOI 10.4236/JMMCE.2013.15036

[5] A study of the mechanical properties of short natural-fiber reinforced composites [J].

Herrera-Franco, PJ ;

Valadez-González, A .

COMPOSITES PART B-ENGINEERING, 2005, 36 (08) :597-608

[6] Effect of swirling abrasives induced by a novel threaded nozzle in machining of CFRP composites [J].

Madhu, S. ;

Balasubramanian, M. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12) :4175-4189

[7] Effect of abrasive jet process parameters on machining glass fibre reinforced polymer composite [J].

Madhu, S. ;

Balasubramanian, M. .

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2017, 48 (11) :1146-1157

[8]

Narayana Lakshmi, 2013, REC ADV ROB AERONAUT

[9]

Natarajan A., 2009, INT J EARTH SCI ENG, V2, P63

[10]

Rajesh Kumar Verma A, 2015, INT C ADV RES INN IC

← 1 2 →