Synthesis and characterization of electro-spun TiO2 and TiO2-SnO2 composite nano-fibers for application in advance generation solar cells

被引:5
作者
Akhlaq, Maham [1 ,2 ]
Khan, Zuhair S. [1 ]
机构
[1] NUST, USPCAS E, Islamabad 44000, Pakistan
[2] NUST, USPCAS E, Adv Energy Mat & Syst Lab, Islamabad 44000, Pakistan
关键词
nano-fibers; electro-spinning; solar cells; titanium oxide; tin oxide; OPTICAL-PROPERTIES; FACILE SYNTHESIS; NANOFIBERS; EFFICIENCY; NANOPARTICLES; PHOTOANODE; SNO2; ZNO; TEMPERATURE; FILM;
D O I
10.1088/2053-1591/ab68a1
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Due to rapid progressive research in the field of nano-technology, nanostructures are attaining tremendous deliberation. Precisely, among these, nano-fibers have accumulated unprecedented attention over the last few years owing to their superior properties such as large surface area to volume ratio. For advance generation solar cells, nano-fibers of metal oxides such as TiO2 have been widely employed as a working anode but due to the disadvantages of recombination of electrons, their coupling with other metal oxides is necessary to render them useful. This work reports the successful fabrication of TiO2 , TiO2/SnO2 nano-fibers based film and study of the effect of polymer concentration upon it. The crystal structure of synthesized fibers was investigated using XRD, the morphology and chemical composition was analyzed using SEM and EDX, optical properties and chemical properties were studied using UV-VIS spectrophotometer and FT-IR while the electrical properties were studied using Hall Effect measurement system. It was revealed that the prepared TiO2-SnO2 nano-fibers exhibit enhanced conductivity, larger band-gap with enhanced photo voltaic properties than TiO2 nano-fibers. The prepared TiO2/SnO2 nano-fibers based solar cells provide an improved efficiency of 4.81% as compared to 1.8% efficiency of bare TiO2 nano-fibers.
引用
收藏
页数:11
相关论文
共 44 条
[1]   Titania nano-fibers: A review on synthesis and utilities [J].
Altaf, Ataf Ali ;
Ahmed, Muneeb ;
Hamayun, Muhammad ;
Kausar, Samia ;
Waqar, Muhammad ;
Badshah, Amin .
INORGANICA CHIMICA ACTA, 2020, 501
[2]  
Ba-Abbad MM, 2012, INT J ELECTROCHEM SC, V7, P4871
[3]   A bicomponent TiO2/SnO2 particulate film for photocatalysis [J].
Cao, Y ;
Zhang, XT ;
Yang, WS ;
Du, H ;
Bai, YB ;
Li, TJ ;
Yao, JN .
CHEMISTRY OF MATERIALS, 2000, 12 (11) :3445-3448
[4]  
Chem J M, 2012, J MATER CHEM, V22, P7910, DOI [10.1039/c2jm16148f, DOI 10.1039/C2JM16148F]
[5]   The synthesis of PrB6 nanowires and nanotubes by the self-catalyzed method [J].
Chi, Mingfeng ;
Zhao, Yanming ;
Fan, Qinghua ;
Han, Wei .
CERAMICS INTERNATIONAL, 2014, 40 (06) :8921-8924
[6]   A review on materials for light scattering in dye-sensitized solar cells [J].
Deepak, T. G. ;
Anjusree, G. S. ;
Thomas, Sara ;
Arun, T. A. ;
Nair, Shantikumar V. ;
Nair, A. Sreekumaran .
RSC ADVANCES, 2014, 4 (34) :17615-17638
[7]   Enhanced Conversion Efficiency in Dye-Sensitized Solar Cells Based on Bilayered Nano-Composite Photoanode Film Consisting of TiO2 Nanoparticles and Nanofibers [J].
Du, P. F. ;
Song, L. X. ;
Xiong, J. .
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2014, 14 (06) :4164-4169
[8]   Band-gap engineering of metal oxides for dye-sensitized solar cells [J].
Duerr, M. ;
Rosselli, S. ;
Yasuda, A. ;
Nelles, G. .
JOURNAL OF PHYSICAL CHEMISTRY B, 2006, 110 (43) :21899-21902
[9]   Nanoforest Nb2O5 Photoanodes for Dye-Sensitized Solar Cells by Pulsed Laser Deposition [J].
Ghosh, Rudresh ;
Brennaman, M. Kyle ;
Uher, Tim ;
Ok, Myoung-Ryul ;
Samulski, Edward T. ;
McNeil, L. E. ;
Meyer, Thomas J. ;
Lopez, Rene .
ACS APPLIED MATERIALS & INTERFACES, 2011, 3 (10) :3929-3935
[10]   Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials [J].
Gong, Jiawei ;
Liang, Jing ;
Sumathy, K. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2012, 16 (08) :5848-5860