The effect of NiB additive on surface morphology and microstructure of 316L stainless steel single tracks and layers obtained by SLM

被引：32

作者：

Stasic, J. ^{[1
]}

Bozic, D. ^{[1
]}

机构：

[1] Univ Belgrade, Inst Nucl Sci Vinca, Mike Petrovica Alasa 12-14,POB 522, Belgrade 11001, Serbia

来源：

SURFACE & COATINGS TECHNOLOGY | 2016年 / 307卷

关键词：

SLM process; 316L stainless steel; NiB additive; Single tracks and layers; Structure; Surface roughness; EXPERIMENTAL-DESIGN APPROACH; LASER; POWDER; PARTS; BORON; ALLOY; IRON;

D O I：

10.1016/j.surfcoat.2016.09.019

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Stainless steel (316L) powder and mixed 316L-lwt.%NiB powders were melted by laser irradiation. Laser employed was pulsed, millisecond Nd:YAG laser system. The relationship between major process variables - average laser power, laser scan speed, number of spots, pulse energy, pulse duration, pulse frequency - of selective laser melting, and their effect on the structure of single tracks and single layers in case of 316L and 316L-NiB alloys has been investigated. The morphology, macro- and microstructure of laser melted samples were characterized by digital camera and by scanning electron microscope with an energy dispersive X-ray spectrometer. Surface roughness of the layers was measured using optical profilometer. It was determined that the addition of NiB to 316L stainless steel powder provides much better surface quality and wider set of parameters for successful melting. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：407 / 417

页数：11

共 28 条

[1] Experimental design approach to optimize selective laser melting of martensitic 17-4 PH powder: part I - single laser tracks and first layer [J].

Averyanova, M. ;

Cicala, E. ;

Bertrand, Ph ;

Grevey, Dominique .

RAPID PROTOTYPING JOURNAL, 2012, 18 (01) :28-37

[2]

Beal V.E., 2005, THESIS

[3]

Bozic D., 2016, SCI SINTER IN PRESS

[4]

Brytan Z., 2011, J ACHIEVEMENTS MAT M, V47, P42

[5] An experimental design approach to selective laser sintering of low carbon steel [J].

Chatterjee, AN ;

Kumar, S ;

Saha, P ;

Mishra, PK ;

Choudhury, AR .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 136 (1-3) :151-157

[6] Direct laser remelting of iron with addition of boron [J].

Chen, XC ;

Xie, JW ;

Fox, P .

MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (06) :715-719

[7] Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting [J].

Cherry, J. A. ;

Davies, H. M. ;

Mehmood, S. ;

Lavery, N. P. ;

Brown, S. G. R. ;

Sienz, J. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 76 (5-8) :869-879

[8] Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting [J].

Chou, R. ;

Milligan, J. ;

Paliwal, M. ;

Brochu, M. .

JOM, 2015, 67 (03) :590-596

[9] PRODUCTION OF STAINLESS-STEEL FILTERS BY LIQUID-PHASE ACTIVATED GRAVITY SINTERING [J].

DANNINGER, H ;

JANGG, G ;

GIAHI, M .

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1988, 19 (06) :205-211

[10]

Farshidianfar M.H., 2014, THESIS

← 1 2 3 →