共 34 条
Performance of cathode-supported SOFC with Ni0.5Cu0.5-CGO anode operated in humidified hydrogen and in low-concentration dry methane
被引:9
作者:
Chen, Gang
[1
]
Guan, Guoqing
[2
]
Kasai, Yutaka
[3
]
You, Hong-Xin
[4
]
Abudula, Abuliti
[1
,2
]
机构:
[1] Hirosaki Univ, Grad Sch Sci & Technol, Hirosaki, Aomori 0368560, Japan
[2] Hirosaki Univ, NJRISE, Aomori 0300813, Japan
[3] Aomori Prefectural Ind Technol Res Ctr, Ind Res Inst, Aomori 0300113, Japan
[4] Dalian Univ Technol, Chem Engn Coll, Dalian 116024, Peoples R China
关键词:
Solid oxide fuel cell;
Cathode-supported;
Bimetallic anode;
Methane;
OXIDE FUEL-CELLS;
DIRECT OXIDATION;
DEGRADATION;
HYDROCARBONS;
ELECTROLYTE;
FABRICATION;
CONVERSION;
LAYER;
FILM;
SDC;
D O I:
10.1007/s10008-011-1615-1
中图分类号:
O646 [电化学、电解、磁化学];
学科分类号:
081704 ;
摘要:
A Ni0.5Cu0.5-CGO (Ce0.8Gd0.2O1.9) anode in a LSM ((La0.75Sr0.25)(0.95)MnO3-delta )-CGO cathode-supported SOFC is tested in humidified H-2 (3% H2O) and in low concentration of dry methane, respectively. After co-sintering at 1,300 A degrees C, it was found that the A-site-deficient LSM effectively hindered the formation of La2Zr2O7 or SrZrO3. The OCVs of the cell are as high as 1.132, 1.14, and 1.147 V in humidified H-2 and 1.314, 1.269, and 1.2 V in 14.8% of dry methane at 850, 800 and 750 A degrees C, respectively, indicating that the ScSZ electrolyte film prepared by the present method is dense enough. The corresponding peak power densities are 0.396, 0.287, and 0.19 W cm(-2) in humidified H-2 and 0.249, 0.164, and 0.096 W cm(-2) in 14.8% of dry methane at 850, 800, and 750 A degrees C, respectively. The prepared cathode-supported SOFC with NiCu-CGO bimetallic anode shows long-term stability when dry methane is used as fuel.
引用
收藏
页码:2071 / 2077
页数:7
相关论文