A Novel High-Speed Shear Test for Lead-Free Flip Chip Packages

Despite the importance of lead-free solders in modern environmentally friendly packaging, few studies have been conducted on their mechanical reliability at the wafer level. In the present study, high-speed die shear tests were conducted to investigate the effects of strain rate on the shearing resistance and fracture mode of Sn-3w%Ag-0.5wt%Cu solder joints on electroless Ni-P/immersion Au surface finish pads. The results indicated that the solder joints underwent ductile and mixed ductile-brittle fracture at low (<855 s(-1)) and high (>25,385 s(-1)) strain rates, respectively. Thus, the overall shear stress-strain curve can be divided into three areas according to Hollomon's law, starting from low strain rates: area I, 100% ductile fracture of the solder itself; area II, mixed ductile-brittle fracture resulting in a ductile-brittle transition region; and area III, 100% brittle fracture at the interface between the intermetallic compound and the Ni-P layer.