Selective laser melting of nano-TiN modified AlSi10Mg composite powder with low laser reflectivity

被引:52
作者
Gao, Chaofeng [1 ]
Xiao, Zhiyu [1 ]
Liu, Zhongqiang [1 ]
Zhu, Quanli [1 ]
Zhang, Weiwen [1 ]
机构
[1] South China Univ Technol, Guangdong Key Lab Adv Metall Mat Proc, Natl Engn Res Ctr Near Net Shape Forming Metall M, 381 Wushan, Guangzhou 510640, Guangdong, Peoples R China
基金
中国国家自然科学基金;
关键词
Selective laser melting; AlSi10Mg; Nanoparticles; Metallic composites; Microstructure; SINTERING/MELTING SLS/SLM; AL; MICROSTRUCTURE; NANOCOMPOSITES; REINFORCEMENT; VOLUME; ALLOY;
D O I
10.1016/j.matlet.2018.10.126
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A novel ultrasonic vibration dispersion method was used to produce TiN nanopowder decorated TiN/AlSi10Mg composite powder. The promising selective laser melting (SLM) technique was then used to fabricated TiN/AlSi10Mg nanocomposites. It showed that the near-spherical composite powder surface was uniformly distributed with TiN nanopowder. The laser reflectivity of the composite powder was reduced from 62% to 25% compared to that of the original powder. The SLMed composite parts, with a uniform distribution of nano TiN reinforcing particles and well-bonded interfaces, could be successfully formed at a low laser power of 100 W. A few agglomerated TiN particles grew into micron-sized spherical clusters. With the addition of TiN, the microstructure was significantly refined, and the hardness of the samples increased from 126 HV0.1 to 145 HV0.1. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码:362 / 365
页数:4
相关论文
共 20 条
[1]  
Aboulkhair N.T., 2014, Addit. Manuf., V1, P77, DOI DOI 10.1016/J.ADDMA.2014.08.001
[2]   Selective laser melting of TiB2/316L stainless steel composites: The roles of powder preparation and hot isostatic pressing post-treatment [J].
AlMangour, Bandar ;
Grzesiak, Dariusz ;
Yang, Jenn-Ming .
POWDER TECHNOLOGY, 2017, 309 :37-48
[3]   Selective laser melting of TiC reinforced 316L stainless steel matrix nanocomposites: Influence of starting TiC particle size and volume content [J].
AlMangour, Bandar ;
Grzesiak, Dariusz ;
Jenn-MingYang .
MATERIALS & DESIGN, 2016, 104 :141-151
[4]  
Bergman T. L, 2011, INTRO HEAT TRANSFER
[5]   Selective laser melting of in-situ Al4SiC4+SiC hybrid reinforced Al matrix composites: Influence of starting SiC particle size [J].
Chang, Fei ;
Gu, Dongdong ;
Dai, Donghua ;
Yuan, Pengpeng .
SURFACE & COATINGS TECHNOLOGY, 2015, 272 :15-24
[6]   Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites [J].
Dadbakhsh, S. ;
Hao, L. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 541 :328-334
[7]   Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi 10Mg composites [J].
Dai, Donghua ;
Gu, Dongdong .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 100 :14-24
[8]   Tailoring surface quality through mass and momentum transfer modeling using a volume of fluid method in selective laser melting of TiC/AlSi10Mg powder [J].
Dai, Donghua ;
Gu, Dongdong .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2015, 88 :95-107
[9]   Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser melting [J].
Gu, Dongdong ;
Wang, Hongqiao ;
Dai, Donghua ;
Yuan, Pengpeng ;
Meiners, Wilhelm ;
Poprawe, Reinhart .
SCRIPTA MATERIALIA, 2015, 96 :25-28
[10]   Effect of TiN nanoparticles on microstructure and properties of Al2024-TiN nanocomposite by high energy milling and spark plasma sintering [J].
Li, Bing ;
Sun, Fei ;
Cai, Qizhou ;
Cheng, Jingfan ;
Zhao, Bingyi .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 726 :638-650