2 μm passively mode-locked thulium-doped fiber lasers with Ta2AlC-deposited tapered and side-polished fibers

被引:15
|
作者
Ahmad, H. [1 ,2 ]
Azri, M. F. M. [1 ]
Ramli, R. [1 ]
Samion, M. Z. [1 ]
Yusoff, N. [1 ]
Lim, K. S. [1 ]
机构
[1] Univ Malaya, Photon Res Ctr, Kuala Lumpur 50603, Malaysia
[2] Univ Malaya, Fac Sci, Dept Phys, Kuala Lumpur 50603, Malaysia
关键词
SATURABLE ABSORBER; HIGH-POWER; CARBON NANOTUBES; PULSE GENERATION; C-BAND; AMPLIFIER; GRAPHENE; SOLITON; TA2ALC; SENSOR;
D O I
10.1038/s41598-021-99928-z
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
In this work, mode-locked thulium-doped fiber lasers operating in the 2 mu m wavelength region were demonstrated using tantalum aluminum carbide (Ta2AlC)-based saturable absorbers (SAs) utilizing the evanescent wave interaction. The Ta2AlC MAX Phase was prepared by dissolving the Ta2AlC powder in isopropyl alcohol and then deposited onto three different evanescent field-based devices, which were the tapered fiber, side-polished fiber, and arc-shaped fiber. Flame-brushing and wheel-polishing techniques were used to fabricate the tapered and arc-shaped fibers, respectively, while the side-polished fiber was purchased commercially. All three SA devices generated stable mode-locked pulses at center wavelengths of 1937, 1931, and 1929 nm for the tapered, side-polished, and arc-shaped fibers. The frequency of the mode-locked pulses was 10.73 MHz for the tapered fiber, 9.58 MHz for the side-polished fiber, and 10.16 MHz for the arc-shaped fiber. The measured pulse widths were 1.678, 1.734, and 1.817 ps for each of the three SA devices. The long-term stability of the mode-locked lasers was tested for each configuration over a 2-h duration. The lasers also showed little to no fluctuations in the center wavelengths and the peak optical intensities, demonstrating a reliable, ultrafast laser system.
引用
收藏
页数:17
相关论文
共 50 条
  • [41] Boron carbon oxynitride coated arc-shaped fiber as an optical modulator for passively mode-locked fiber lasers at 1.5 and 2 μm wavelength
    Ahmad, H.
    Nizamani, B.
    Sekar, S.
    Samion, M. Z.
    Yusoff, N.
    Venkataprasad Bhat, S.
    PHYSICA SCRIPTA, 2023, 98 (02)
  • [42] Yb-doped passively mode-locked fiber laser with Bi2Te3-deposited
    Li Lu
    Yan Pei-Guang
    Wang Yong-Gang
    Duan Li-Na
    Sun Hang
    Si Jin-Hai
    CHINESE PHYSICS B, 2015, 24 (12)
  • [43] Generation and evolution of multiple operation states in passively mode-locked thulium-doped fiber laser by using a graphene-covered-microfiber
    王小发
    张俊红
    彭晓玲
    毛雪峰
    Chinese Physics B, 2018, (08) : 305 - 311
  • [44] Mode-locked thulium-doped fiber laser based on 0.3 nm diameter single-walled carbon nanotubes at 1.95 μm
    Chen, Yanping
    Zhai, Jianpang
    Xu, Xintong
    Li, Ling
    Wang, Jinzhang
    Zhang, Min
    Ruan, Shuangchen
    Tang, Zikang
    CHINESE OPTICS LETTERS, 2017, 15 (04)
  • [45] The performance of Ti2C MXene and Ti2AlC MAX Phase as saturable absorbers for passively mode-locked fiber laser
    Ahmad, H.
    Kahar, N. H. Abdul
    Ramli, R.
    Yusoff, N.
    Reduan, S. A.
    Ismail, M. F.
    Lim, K. S.
    Chong, W. Y.
    Yasin, M.
    OPTICAL FIBER TECHNOLOGY, 2021, 67
  • [46] Deposition of Ti2AlC MAX phase onto the side polished fiber as saturable absorber for soliton mode-locked fiber laser generation
    Harith Ahmad
    Neshat Sadafi
    Norazriena Yusoff
    Chong Wu Yi
    Optical and Quantum Electronics, 2022, 54
  • [47] Selectively mode-locked high-order-mode 2-μm thulium fiber laser
    Huang, Chao
    Xiao, Hongjing
    Xu, Jianqiu
    Tang, Yulong
    OPTICS COMMUNICATIONS, 2019, 440 : 95 - 99
  • [48] Mode-locked operation in thulium-holmium doped fiber laser based on Cr2AlC MAX phase SA coated arc-shaped fiber
    Ahmad, Harith
    Makhfuz, Maryam Jasmine Mohd
    Yusoff, Norazriena
    Sadafi, Neshat
    Samion, Muhamad Zharif
    Yasin, M.
    OPTICAL AND QUANTUM ELECTRONICS, 2023, 55 (03)
  • [49] Generation of Q-switched Pulses in Thulium-doped and Thulium/Holmium-co-doped Fiber Lasers using MAX phase (Ti3AlC2)
    Ahmad, H.
    Kamely, A. A.
    Yusoff, N.
    Bayang, L.
    Samion, M. Z.
    SCIENTIFIC REPORTS, 2020, 10 (01)
  • [50] Sb2Te3 topological insulator based saturable absorber for Er-doped mode-locked fiber lasers
    Sotor, J.
    Sobon, G.
    Boguslawski, J.
    Tarka, J.
    Abramski, Krzysztof M.
    FIBER LASERS XII: TECHNOLOGY, SYSTEMS, AND APPLICATIONS, 2015, 9344