Mechanical characterization of steel/CFRP double strap joints at elevated temperatures

被引：175

作者：

Nguyen, Tien-Cuong ^{[1
]}

Bai, Yu ^{[1
]}

Zhao, Xiao-Ling ^{[1
]}

Al-Mahaidi, Riadh ^{[2
]}

机构：

[1] Monash Univ, Dept Civil Engn, Clayton, Vic 3800, Australia

[2] Swinburne Univ Technol, Fac Engn & Ind Sci, Hawthorn, Vic 3122, Australia

来源：

COMPOSITE STRUCTURES | 2011年 / 93卷 / 06期

基金：

澳大利亚研究理事会;

关键词：

CFRP; Steel; Double strap joint; Temperature effect; Mechanical properties; Effective bond length; MODULUS; COMPOSITES; BEHAVIOR;

D O I：

10.1016/j.compstruct.2011.01.010

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper examines the mechanical performance of steel/CFRP adhesively-bonded double strap joints at elevated temperatures around the glass transition temperature (T-g, 42 degrees C) of the adhesive. A series of joints with different bond lengths were tested to failure at temperatures between 20 degrees C and 60 degrees C. It was found that the joint failure mode changed from adherend failure to debonding failure as the temperature approached T-g. In addition, the ultimate load and joint stiffness decreased significantly at temperatures near to and greater than T-g, while the effective bond length increased with temperature. Based on the ultimate load prediction model developed by Hart-Smith for double lap joints and kinetic modelling of the mechanical degradation of the adhesive, a mechanism-based model is proposed to describe the change of effective bond length, stiffness and strength degradation for steel/CFRP double strap joints at elevated temperatures. The modelling results were validated by the corresponding experimental measurements. (C) 2011 Elsevier Ltd All rights reserved.

引用

页码：1604 / 1612

页数：9

共 50 条

[31] Mechanical properties of very high strength steel at elevated temperatures [J].

Heidarpour, Amin ;

Tofts, Niall S. ;

Korayem, Asghar H. ;

Zhao, Xiao-Ling ;

Hutchinson, Christopher R. .

FIRE SAFETY JOURNAL, 2014, 64 :27-35

[32] Mechanical properties of bridge-steel weldments at elevated temperatures [J].

Qiang, Bin ;

Liu, Xinran ;

Li, Yadong ;

Kang, Guozheng .

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2022, 191

[33] CFRP-to-steel bonded joints subjected to cyclic loading: An experimental study [J].

Yang, Yongming ;

Silva, Manuel A. G. ;

Biscaia, Hugo ;

Chastre, Carlos .

COMPOSITES PART B-ENGINEERING, 2018, 146 :28-41

[34] Determination of Mechanical Properties of Double-Strap Adhesive Joints with an Embedded Patch [J].

Citil, Serif ;

Temiz, Semsettin ;

Altun, Hikmet ;

Ozel, Adnan .

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (18) :2555-2567

[35] The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets [J].

Jarrah, Majid ;

Najafabadi, Esmaeil Pournamazian ;

Khaneghahi, Mohammad Houshmand ;

Oskouei, Asghar Vatani .

CONSTRUCTION AND BUILDING MATERIALS, 2018, 190 :38-52

[36] Effects of elevated temperature on epoxy bonded CFRP-to-steel joints in Mode I fracture [J].

Jabbari, Milad ;

Raftery, Gary M. ;

Lim, James B. P. .

STRUCTURES, 2021, 33 :3540-3549

[37] Effect of elevated temperatures and humidity on glass/steel adhesive joints [J].

Katsivalis, Ioannis ;

Thomsen, Ole Thybo ;

Feih, Stefanie ;

Achintha, Mithila .

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2020, 102

[38] MECHANICAL PERFORMANCE OF WELDED HOLLOW SPHERICAL JOINTS AT ELEVATED TEMPERATURES [J].

Liu, Hong-bo ;

Zhang, Ying-jie ;

Wang, Lan ;

Chen, Zhi-hua .

ADVANCED STEEL CONSTRUCTION, 2020, 16 (01) :1-12

[39] Mechanical properties of steel fibre reinforced geopolymer concretes at elevated temperatures [J].

Shaikh, Faiz Uddin Ahmed ;

Hosan, Anwar .

CONSTRUCTION AND BUILDING MATERIALS, 2016, 114 :15-28

[40] Mechanical properties of double-sided stainless-clad bimetallic steel at elevated temperatures [J].

Li, Hai-Ting ;

Xu, Chen-Yu ;

Cai, Xiaojing ;

Yan, Bo .

THIN-WALLED STRUCTURES, 2024, 204

← 1 2 3 4 5 →