The relationship between leachability of polymerization initiator and degree of conversion of visible light-cured resin

Recently, polymerization-initiator-induced radicals have been identified as a biohazard as well as residual monomers, The present investigation was conducted to clarify the leaching behavior of the polymerization initiator and to measure the relationship between the leached amount of polymerization initiator and the degree of conversion of visible Light (VL)-cured resin, Moreover, determining a suitable ratio of polymerization initiator to the base monomer according to the above relationship was carried out. The base monomer (UDMA/TEGDMA) was activated with varying concentrations of polymerization initiator (CQ/DMPT, CQ/DMAEMA) from 0.3-0.9 wt%, respectively, which were exposed to light for 40 s, Gas chromatograph mass spectrometry (GCMS) was carried out to evaluate the Leached amount of polymerization initiator. The degree of conversion (DC) of the cured sample was estimated using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. As the result, it was recognized that the leachability of the polymerization initiator (CQ, DMPT, and DMAEMA) depended on the degree of conversion of the VL-cured resin, Therefore, the optimal concentration of polymerization initiator can be determined from the relation between the degree of conversion and the leached amount of polymerization initiator, which is about 0.6 wt% for CQ/DMPT(I:I in weight) and 0.5 wt% for CQ/DMAEMA (1:1 in weight) relative to the UDMA/TEGDMA (1:1 in weight) monomer, (C) 2000 John Wiley & Sons. Inc. J Biomed Mater Res (Appl Biomater) 58: 42-46. 2001.