Preparation of CuCrO2 Anisotropic Dela-fossite-Type Thin Film by Electrospinning on Glass Substrates

被引：4

作者：

Yu, Chung-Lun ^{[1
]}

Weng, Chia-Hsuan ^{[1
]}

Huang, Rong-Jun ^{[1
]}

Sakthinathan, Subramanian ^{[1
]}

Chiu, Te-Wei ^{[1
]}

Dong, Chaofang ^{[2
]}

机构：

[1] Natl Taipei Univ Technol, Dept Mat & Mineral Resources Engn, 1,Sect 3,Zhongxiao E Rd, Taipei 106, Taiwan

[2] Univ Sci & Technol Beijing, Corros & Protect Ctr, Key Lab Corros & Protect MOE, 30 Xueyuan Rd, Beijing 100083, Peoples R China

来源：

CERAMICS-SWITZERLAND | 2021年 / 4卷 / 03期

关键词：

CuCrO2; thin film; anisotropic; electrospinning; electrical conductivity; optical properties; CHEMICAL SOLUTION DEPOSITION; PULSED-LASER DEPOSITION; ELECTRICAL-PROPERTIES; CUCR1-XMGXO2; FILMS; OPTICAL-PROPERTIES; TRANSPARENT; FABRICATION; PRESSURE;

D O I：

10.3390/ceramics4030026

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Anisotropic CuCrO2 thin films were successfully prepared on glass substrate by the electrospinning method followed by annealing at 600 degrees C. The directionality of the nanowires increased with increases in rotation speed. In addition, the structural formation and optoelectronic behavior of the CuCrO2 thin films have been studied by X-ray powder diffraction studies, transmission electron microscopy, field emission scanning electron microscopy, and UV-vis spectroscopy. The X-ray diffraction studies revealed a delafossite properties of the CuCrO2. The electrical conductivity in the parallel and vertical directions of the films produced at 2000-3000 rpm differed by two to three orders of magnitude. The optical transmittance properties of the CuCrO2 thin films were improved by increasing the rotation speed.

引用

页码：364 / 377

页数：14

共 50 条

[21] Influence of deposition time on ZnS thin film growth over SiO2 and glass substrates
Luque, P. A.
Quevedo-Lopez, M. A.
Olivas, A.
MATERIALS LETTERS, 2013, 106 : 49 - 51
[22] Mixed phase delafossite structured p type CuFeO2/CuO thin film on FTO coated glass and its Schottky diode characteristics
Bera, A.
Deb, K.
Chattopadhyay, K. K.
Thapa, R.
Saha, B.
MICROELECTRONIC ENGINEERING, 2016, 162 : 23 - 26
[23] Preparation of TiO2 thin film on SiO2 glass by a spin coating-pyrolysis process
Kim, BH
Ahn, JH
Jeong, JH
Jeon, YS
Jeon, KO
Hwang, KS
CERAMICS INTERNATIONAL, 2006, 32 (02) : 223 - 225
[24] Effect of Annealing Temperature on Radio Frequency Sputtered p-Type Delafossite Copper Chromium Oxide (CuCrO2) Thin Films and Investigation of Diode Characteristics Forming Transparent pn-Heterojunction
Sundaresh, Sreeram
Bharath, Akash Hari
Sundaram, Kalpathy B.
COATINGS, 2023, 13 (02)
[25] Zn incorporation and (CuIn)1-xZn2xSe2 thin film formation during the selenization of evaporated Cu and In precursors on Al:ZnO coated glass substrates
Guillen, C.
Herrero, J.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2011, 72 (11) : 1362 - 1366
[26] Structural and physical effects of Mg-doping on p-type CuCrO2 and CuAl0.5Cr0.5O2 thin films
Bywalez, Robert
Goetzendoerfer, Stefan
Loebmann, Peer
JOURNAL OF MATERIALS CHEMISTRY, 2010, 20 (31) : 6562 - 6570
[27] Preparation of vanadium-doped TiO2 thin films on glass substrates
An, JH
Kim, BH
Jeong, JH
Kim, DM
Jeon, YS
Jeon, KO
Hwang, KS
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2005, 6 (02): : 163 - 166
[28] Effect of film thickness on the structural and electrical properties of Ga-doped ZnO thin films prepared on glass and Al2O3 (0001) substrates by RF magnetron sputtering method
Shin, Seung Wook
Pawar, S. M.
Kim, Tae-Won
Moon, Jong-Ha
Kim, Jin Hyeok
JOURNAL OF MATERIALS RESEARCH, 2009, 24 (02) : 441 - 447
[29] Electroluminescent characteristics of ZnGa2O4:Dy3+ thin film devices fabricated on glass substrates
Krishna, K. Mini
Anoop, G.
Jayaraj, M. K.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2012, 209 (12): : 2641 - 2645
[30] Preparation and characterization of nanostructured TiO2 thin film codoped with nitrogen and vanadium on glass surface by sol-gel dip-coating method
Khatibnezhad, Hediyeh
Sani, Mohammad Ali Faghihi
RESEARCH ON CHEMICAL INTERMEDIATES, 2015, 41 (10) : 7349 - 7361

← 1 2 3 4 5 →