Fabrication and oxidation resistance of nanocrystalline Fe10Cr alloy

被引：29

作者：

Gupta, Rajeev K. ^{[1
]}

Raman, R. K. Singh ^{[1
,2
]}

Koch, Carl C.

机构：

[1] Monash Univ, Dept Mech & Aerosp Engn, Melbourne, Vic 3800, Australia

[2] Monash Univ, Dept Chem Engn, Melbourne, Vic 3800, Australia

来源：

JOURNAL OF MATERIALS SCIENCE | 2010年 / 45卷 / 17期

关键词：

GRAIN-SIZE; MECHANICAL-PROPERTIES; ENHANCED OXIDATION; WATER-VAPOR; CR ALLOYS; MICROSTRUCTURE; BEHAVIOR; IRON; CORROSION; CHROMIUM;

D O I：

10.1007/s10853-010-4665-3

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Nanocrystalline (nc) and microcrystalline (mc) Fe10Cr alloys were prepared by high energy ball-milling followed by compaction and sintering, and then oxidized in air for 52 h at 400 A degrees C. The oxidation resistance of nc Fe10Cr alloy as determined by measuring the weight gain after regular time intervals was compared with that of the mc alloy of same chemical composition (also prepared by the same fabrication route and oxidized under identical conditions). Oxidation resistance of nc Fe10Cr alloy was found to be in excess of an order of magnitude superior than that of mc Fe10Cr alloy. This article also presents results of secondary ion mass spectrometry (SIMS) of oxidized samples of nc and mc Fe-Cr alloys, evidencing the formation of a more protective oxide scale in the nc alloy.

引用

页码：4884 / 4888

页数：5

共 50 条

[41] Effect of Alloying Method on Microstructure and Wear Resistance of Fe-Cr-V-B Based Alloy
Ma, Yu
Liu, Ying
Li, Jun
Zhang, Hui
Yang, Hao
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2016, 23 (06) : 625 - 632
[42] Revealing the excellent high-temperature oxidation resistance of a non-equimolar Al1Co25Cr18Fe23Ni23Ta10 compositional complex eutectic alloy
Han, Liuliu
Quan, Tao
Liu, Bin
Xu, Xiandong
Liu, Yong
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 846
[43] Development of multilayer oxidation resistant coatings on Cr-50Nb alloy
Zheng, Haizhong
Xiong, Lingling
Luo, Qinhao
Lu, Shiqiang
APPLIED SURFACE SCIENCE, 2015, 359 : 515 - 520
[44] Role of Cr additions in enhancing wear and oxidation resistance of (Mo1-xCrx)Si2 nanocrystalline films
Xu, Jiang
Li, ZhengYang
Munroe, Paul
Xie, Zong-Han
CERAMICS INTERNATIONAL, 2014, 40 (10) : 15859 - 15874
[45] Compressive behavior of an extruded nanocrystalline Al-Fe-Cr-Ti alloy
Shaw, L
Luo, H
Villegas, J
Miracle, D
SCRIPTA MATERIALIA, 2004, 50 (07) : 921 - 925
[46] Anelastic behavior of Nanocrystalline Fe-Cr alloy obtained by mechanical alloying
Zhou, Z. C.
Du, J.
Yang, H.
ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 780 - 784
[47] Effect of temperature on oxidation resistance and isothermal oxidation mechanism of novel wear-resistant Fe-Cr-B-Al-C-Mn-Si alloy
Ju, Jiang
Yang, Chao
Ma, Shengqiang
Kang, Maodong
Wang, Kaiming
Li, Jingjing
Fu, Hanguang
Wang, Jun
CORROSION SCIENCE, 2020, 170
[48] Predeformation and Subsequent Annealing-A Way for Controlling Morphology of Carbides in Large Dimensional Bulk Nanocrystalline Fe-Al-Cr Alloy
Wang, Hongding
La, Peiqing
Shi, Ting
Wei, Yupeng
Jiao, Huisheng
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (01): : 522 - 528
[49] Microstructure and properties of Fe-Cr-Ni alloy coatings on T10 steel by laser cladding
Zhou, Lei
Liu, Yanhui
Li, Zhiwei
Zhu, Lingjie
Li, Yongjiu
Xiong, Anhui
MATERIALS RESEARCH EXPRESS, 2020, 7 (01)
[50] Effect of Nb additive on wear resistance and tensile properties of the hypereutectic Fe-Cr-C hardfacing alloy
Liu, Sha
Shi, Zhijun
Xing, Xiaolei
Ren, Xuejun
Zhou, Yefei
Yang, Qingxiang
MATERIALS TODAY COMMUNICATIONS, 2020, 24

← 1 2 3 4 5 →