Development of structural ceramics having large crack-healing ability and fracture toughness

被引:0
作者
Takahashi, K [1 ]
Yokouchi, M [1 ]
Lee, SK [1 ]
Ando, K [1 ]
机构
[1] Yokohama Natl Univ, Yokohama, Kanagawa 2408501, Japan
来源
SMART MATERIALS III | 2005年 / 5648卷
关键词
crack healing; alumina; SiC whiskers; fracture toughness;
D O I
10.1117/12.580719
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Al2O3 reinforced by SiC whiskers (Al2O3/SiC-W) was hot pressed to investigate the crack-healing behavior. Semi-elliptical surface cracks of 50 to 450 mu m in surface length were introduced using a Vickers indenter. The specimens containing pre-cracks were crack-healed at temperatures between 1000 degrees C and 1300 degrees C for 1h in air, and their strengths were measured by three-point bending tests at room temperature and elevated temperatures between 400 degrees C and 1300 degrees C. The results show that Al2O3/SiC-W possesses considerable crack-healing ability. The surface cracks with length of 2c = 100 mu m. could be healed by crack-healing at 1200 degrees C or 1300 degrees C. for 1h in air. The maximum crack size that can be healed for Al2O3/SiC-W is 2c = 200 mu m. Fracture toughness of the material was also determined. As expected, the SiC whiskers made their Al2O3 tougher.
引用
收藏
页码:276 / 283
页数:8
相关论文
共 50 条
[41]   Crack-healing behavior of Si3N4/SiC ceramics under stress and fatigue strength at the temperature of healing (1000°C) [J].
Ando, K ;
Houjyou, K ;
Chu, MC ;
Takeshita, S ;
Takahashi, K ;
Sakamoto, S ;
Sato, S .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (08) :1339-1346
[42]   CRACK-HEALING BEHAVIOR AND BENDING STRENGTH PROPERTIES OF SiC CERAMICS BASED ON THE TYPE OF ADDITIVE SiO2 EMPLOYED [J].
Nam, Ki Woo ;
Kim, Jong Soon ;
Park, Seung Won .
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2010, 24 (15-16) :2869-2874
[43]   Effect of crack-healing process on fatigue strength of Si3N4/SiC ceramics at 1000°C [J].
Hojo, K ;
Ando, K ;
Chu, MC ;
Sato, S .
ADVANCED CERAMICS AND COMPOSITES, 2003, 247 :271-274
[44]   Influence of the measuring method for crack length on the fracture toughness of silicon nitride ceramics obtained by the indentation fracture technique [J].
Miyazaki, Hiroyuki ;
Hyuga, Hideki ;
Hirao, Kiyoshi ;
Ohji, Tatsuki .
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2006, 114 (1333) :787-790
[45]   Effect of irreversible energy loss on the fracture toughness and the work-of-fracture of ceramics toughened by crack face bridging [J].
Akatsu, T ;
Tanabe, Y ;
Yasuda, E .
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1998, 106 (04) :390-395
[46]   Elastic wave signal characteristics of SiC ceramics with crack healing ability by wavelet analysis [J].
Kim, JW ;
Park, BW ;
Ahn, SH ;
Nam, KW .
ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4, 2005, 297-300 :2046-2051
[47]   Fracture Toughness of Advanced Structural Ceramics: Applying ASTM C1421 [J].
Swab, Jeffrey J. ;
Tice, Jason ;
Wereszczak, Andrew A. ;
Kraft, Reuben H. .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2015, 98 (02) :607-615
[48]   Crack-healing and pre-oxidation behavior of ZrO2 fiber toughened ZrB2-based ceramics [J].
Lin, Jia ;
Huang, Yu ;
Zhang, Houan .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 :5-10
[49]   A new method of fracture toughness determination in brittle ceramics by open-crack shape analysis [J].
F HAUBENSAK ;
A. S ARGON .
Journal of Materials Science, 1997, 32 :1473-1477
[50]   Crack-healing behavior and strength recovery of hot-pressed TZ3Y20A-MoSi2 ceramics [J].
Zhang, Xiu-Ping ;
Ouyang, Jia-Hu ;
Liu, Zhan-Guo ;
Wang, Yu-Jin ;
Wang, Ya-Ming .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 648 :299-304