Development of structural ceramics having large crack-healing ability and fracture toughness

被引:0
作者
Takahashi, K [1 ]
Yokouchi, M [1 ]
Lee, SK [1 ]
Ando, K [1 ]
机构
[1] Yokohama Natl Univ, Yokohama, Kanagawa 2408501, Japan
来源
SMART MATERIALS III | 2005年 / 5648卷
关键词
crack healing; alumina; SiC whiskers; fracture toughness;
D O I
10.1117/12.580719
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Al2O3 reinforced by SiC whiskers (Al2O3/SiC-W) was hot pressed to investigate the crack-healing behavior. Semi-elliptical surface cracks of 50 to 450 mu m in surface length were introduced using a Vickers indenter. The specimens containing pre-cracks were crack-healed at temperatures between 1000 degrees C and 1300 degrees C for 1h in air, and their strengths were measured by three-point bending tests at room temperature and elevated temperatures between 400 degrees C and 1300 degrees C. The results show that Al2O3/SiC-W possesses considerable crack-healing ability. The surface cracks with length of 2c = 100 mu m. could be healed by crack-healing at 1200 degrees C or 1300 degrees C. for 1h in air. The maximum crack size that can be healed for Al2O3/SiC-W is 2c = 200 mu m. Fracture toughness of the material was also determined. As expected, the SiC whiskers made their Al2O3 tougher.
引用
收藏
页码:276 / 283
页数:8
相关论文
共 50 条
  • [21] Crack-healing behavior of hot-pressed TZ3Y20A-SiC ceramics
    Zhang, Xiu-Ping
    Ouyang, Jia-Hu
    Liu, Zhan-Guo
    Wang, Yu-Jin
    Zhou, Yu
    CERAMICS INTERNATIONAL, 2014, 40 (05) : 6611 - 6615
  • [22] Self-healing Ability of Structural Ceramics - A Review
    Madhan, M.
    Prabhakaran, G.
    TRENDS IN INTELLIGENT ROBOTICS, AUTOMATION, AND MANUFACTURING, 2012, 330 : 466 - 474
  • [23] Crack-healing ability and strength recovery of different hot-pressed TZ3Y20A-SiC ceramics by heat treatment in air
    Zhang, Xiu-Ping
    Ouyang, Jia-Hu
    Liu, Zhan-Guo
    Wang, Yu-Jin
    Wang, Ya-Ming
    Zhou, Yu
    MATERIALS & DESIGN, 2015, 67 : 324 - 329
  • [24] In situ crack-healing behavior of Al2O3/SiC composite ceramics under static fatigue strength
    Liu, Sung-Po
    Ando, Kotoji
    Kim, Byung-Soo
    Takahashi, Koji
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (06) : 563 - 568
  • [25] Bending strength and crack-healing behavior of Al2O3/SiC composites ceramics
    Kim, Hae Sook
    Kim, Mi Kyung
    Kang, Sun Bae
    Ahn, Seok Hwan
    Nam, Ki Woo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 : 672 - 675
  • [26] On the estimation and modeling of fracture toughness in structural ceramics in a simple way
    Wang, Anzhe
    Wang, Yongzheng
    Zhang, Cong
    Zhang, Tao
    Liao, Hailong
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 103
  • [27] A probabilistic model for the scale effect on fracture toughness of structural ceramics
    Amkee Kim
    Seung-Hoon Nahm
    KSME International Journal, 1998, 12 : 792 - 799
  • [28] A probabilistic model for the scale effect on fracture toughness of structural ceramics
    Kim, A
    Nahm, SH
    KSME INTERNATIONAL JOURNAL, 1998, 12 (05): : 792 - 799
  • [29] On the fracture toughness of ferroelectric ceramics with electric field applied parallel to the crack front
    Wang, JX
    Landis, CM
    ACTA MATERIALIA, 2004, 52 (12) : 3435 - 3446
  • [30] Improved Fracture Toughness and Crack Arrest Ability of Graphene-Alumina Nanocomposite
    Akhil Raj, V. R.
    Hadagalli, Komalakrushna
    Jana, Premanshu
    Mandal, Saumen
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (02) : 1234 - 1244