Fabrication of dense nanocrystalline ZrO2-3 wt. % Y2O3 by hot-isostatic pressing

被引:21
作者
Chaim, R [1 ]
Hefetz, M
机构
[1] Technion Israel Inst Technol, Dept Mat Engn, IL-32000 Haifa, Israel
[2] Armament Dev Author, IL-31021 Haifa, Israel
关键词
D O I
10.1557/JMR.1998.0266
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Amorphous to nanocrystalline ZrO2-3 wt. % Y2O3 powders were formed by chemical precipitation from mixed nitrate salt solutions. The powders were cold pressed and presintered in air for 2 to 6 h within the temperature range of 1100 degrees C and 1300 degrees C. Hot isostatic pressing was performed for 2 to 3 h within the temperature range of 1150 degrees C to 1350 degrees C in argon pressure of 150 MPa. Fully dense pellets with grain size of 22 nm to 45 nm were formed by application of low presintering temperatures.
引用
收藏
页码:1875 / 1880
页数:6
相关论文
共 41 条
[1]   ENHANCED DEFORMATION-BEHAVIOR OF INCOMPLETELY SINTERED Y-TZP ZIRCONIA [J].
AKMOULIN, IA ;
DJAHAZI, M ;
JONAS, JJ .
SCRIPTA METALLURGICA ET MATERIALIA, 1991, 25 (05) :1035-1040
[2]  
Ashby M.F., 1982, DEFORMATION MECH MAP
[3]   GRAIN-SIZE-DEPENDENT TRANSFORMATION BEHAVIOR IN POLYCRYSTALLINE TETRAGONAL ZIRCONIA [J].
BECHER, PF ;
SWAIN, MV .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1992, 75 (03) :493-502
[4]   The role of a threshold stress in the superplastic deformation of fine-grained yttria-stabilized zirconia polycrystals [J].
BravoLeon, A ;
JimenezMelendo, M ;
DominguezRodriguez, A ;
Chokshi, AH .
SCRIPTA MATERIALIA, 1996, 34 (07) :1155-1160
[5]  
BURGGRAAF AJ, 1993, 3 EURO CERAMICS, V3, P561
[6]  
Chen D.-J., 1993, Nanostructured Materials, V2, P469, DOI 10.1016/0965-9773(93)90164-7
[7]  
COOK ACF, 1994, ACTA METALL MATER, V42, P2191
[8]   Low-temperature sintering and microstructural development of nanocrystalline Y-TZP powders [J].
Duran, P ;
Villegas, M ;
Capel, F ;
Recio, P ;
Moure, C .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1996, 16 (09) :945-952
[9]  
FENG C, 1995, J MATER SYNTH PROC, V3, P25
[10]  
GROSSE E, 1986, EPL-EUROPHYS LETT, V2, P1