Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools

被引：64

作者：

Vereschaka, Alexey ^{[1
]}

Tabakov, Vladimir ^{[2
]}

Grigoriev, Sergey ^{[3
]}

Sitnikov, Nikolay ^{[4
]}

Milovich, Filipp ^{[5
]}

Andreev, Nikolay ^{[5
]}

Sotova, Catherine ^{[3
]}

Kutina, Natalya ^{[6
]}

机构：

[1] ICTI RAS, Vadkovsky Per 18-1A, Moscow 127055, Russia

[2] Ulyanovsk State Tech Univ, SevernyiVenec 32, Ulyanovsk 432027, Russia

[3] Moscow State Technol Univ STANKIN, Vadkovsky Per 1, Moscow 127994, Russia

[4] Natl Res Nucl Univ MEPhI, Moscow Engn Phys Inst, Kashirskoeshosse 31, Moscow 115409, Russia

[5] Natl Univ Sci & Technol MISIS, Leninsky Prospect 4, Moscow 119049, Russia

[6] Bauman Moscow State Tech Univ, 2 Nd Bauman St 5-1, Moscow 105005, Russia

来源：

SURFACE & COATINGS TECHNOLOGY | 2020年 / 385卷

基金：

俄罗斯科学基金会;

关键词：

Multilayered nanostructured coating; Wear; Metal cutting tool; Nanolayer; MULTILAYER COMPOSITE COATINGS; TRIBOLOGICAL PROPERTIES; DEFORMATION-BEHAVIOR; NITRIDE COATINGS; RESIDUAL-STRESS; PERFORMANCE; FILMS; MICROSTRUCTURE; ADHESION; SYSTEM;

D O I：

10.1016/j.surfcoat.2020.125402

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The paper presents the results of the investigation into the formation of the nanolayer structure of the Ti-TiN-(Ti,Cr,Al)N coating and its influence on the thickness of coatings, their resistance to fracture in scratch testing, and the wear resistance of coated tools in turning 1045 steel. The structure of the coatings with the nanolayer thicknesses of 302, 160, 70, 53, 38, 24, 16, and 10 nm was studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution (HR) TEM. It is shown that the grain sizes in the nanolayers decrease to certain values with an increase in the thickness of the nanolayers, and then, with a further decrease in the nanolayer thickness, the grain sizes of the nanolayer grow as the interlayer interfaces cease to produce a restraining effect on the growth of the grains. The study found that the nanolayer thickness influenced the wear of carbide cutting tools and the pattern of fracture for the Ti-TiN-(Ti,Cr,Al)N coatings.

引用

页数：14

共 50 条

[41] Preparation of Wear-Resistant Coating on Ti6Al4V Alloy by Cold Spraying and Plasma Electrolytic Oxidation [J].

Shao, Mingzeng ;

Wang, Wei ;

Yang, Hongbo ;

Zhang, Xueer ;

He, Xiaomei .

COATINGS, 2021, 11 (11)

[42] Effects of Thermo-physical properties of Ti0.41Al0.59N coating on transient and steady cutting temperature distributions in coated cemented carbide tools [J].

Zhao, Jinfu ;

Liu, Zhanqiang .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2018, 96 :80-89

[43] Influence of coating thickness and substrate on stresses and mechanical properties of (Ti,Al,Ta)N/(Al,Cr)N multilayers [J].

Seidl, W. M. ;

Bartosik, M. ;

Kolozsvari, S. ;

Bolvardi, H. ;

Mayrhofer, P. H. .

SURFACE & COATINGS TECHNOLOGY, 2018, 347 :92-98

[44] Wear Mechanism and Modeling of Tribological Behavior of Polycrystalline Diamond Tools When Cutting Ti6Al4V [J].

Li, Guangxian ;

Yi, Shuang ;

Wen, Cuie ;

Ding, Songlin .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2018, 140 (12)

[45] Nickel Effect on the Structure and Properties of Adaptive Wear-Resistant Arc-PVD Ti-Al-Mo-N Coatings [J].

Sergevnin, V. S. ;

Blinkov, I. V. ;

Volkhonskii, A. O. ;

Belov, D. S. .

RUSSIAN JOURNAL OF NON-FERROUS METALS, 2020, 61 (04) :466-474

[46] Phase Formation in the Ti-Al-Mo-N System during the Growth of Adaptive Wear-Resistant Coatings by Arc PVD [J].

Sergevnin, V. S. ;

Blinkov, I. V. ;

Belov, D. S. ;

Volkhonskii, A. O. ;

Skryleva, E. A. ;

Chernogor, A. V. .

INORGANIC MATERIALS, 2016, 52 (07) :735-742

[47] Wear mechanisms of PVD-coated cutting tools during continuous turning of Ti-6Al-4V alloy [J].

Koseki, Shuho ;

Inoue, Kenichi ;

Sekiya, Katsuhiko ;

Morito, Shigekazu ;

Ohba, Takuya ;

Usuki, Hiroshi .

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2017, 47 :434-444

[48] Finite element asnalysis of Ti1-xAlxN coated tools cutting performance and tool wear during Ti-6Al-4V milling [J].

Fan, Guanghui ;

Zhang, Jingjie ;

Zhang, Guoqing ;

Xu, Chonghai ;

Yi, Mingdong .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 :166-182

[49] An Investigation of the Wear Mechanism for Carbide Tools in Face Milling the Ti-5Al-4.75Mo-4.75V-1Cr-1Fe Alloy [J].

Zhang, H. Z. ;

Ming, W. W. ;

Chen, M. ;

Han, B. ;

Rong, B. ;

Liu, G. ;

Zhang, Y. S. .

MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X, 2010, 431-432 :547-550

[50] Influence of Cutting Speed during the Turning of Inconel 718 on Oxidation Wear Pattern on the Zr-ZrN-(Zr,Mo,Al)N Composite Nanostructured Coating [J].

Vereschaka, Alexey ;

Milovich, Filipp ;

Andreev, Nikolay ;

Migranov, Mars ;

Alexandrov, Islam ;

Muranov, Alexander ;

Mikhailov, Maxim ;

Tatarkanov, Aslan .

JOURNAL OF COMPOSITES SCIENCE, 2023, 7 (01)

← 1 2 3 4 5 →