Investigation of the influence of the thickness of nanolayers in wear-resistant layers of Ti-TiN-(Ti,Cr,Al)N coating on destruction in the cutting and wear of carbide cutting tools

被引：58
|
作者：
Vereschaka, Alexey [1 ]
Tabakov, Vladimir [2 ]
Grigoriev, Sergey [3 ]
Sitnikov, Nikolay [4 ]
Milovich, Filipp [5 ]
Andreev, Nikolay [5 ]
Sotova, Catherine [3 ]
Kutina, Natalya [6 ]
机构：
[1] ICTI RAS, Vadkovsky Per 18-1A, Moscow 127055, Russia
[2] Ulyanovsk State Tech Univ, SevernyiVenec 32, Ulyanovsk 432027, Russia
[3] Moscow State Technol Univ STANKIN, Vadkovsky Per 1, Moscow 127994, Russia
[4] Natl Res Nucl Univ MEPhI, Moscow Engn Phys Inst, Kashirskoeshosse 31, Moscow 115409, Russia
[5] Natl Univ Sci & Technol MISIS, Leninsky Prospect 4, Moscow 119049, Russia
[6] Bauman Moscow State Tech Univ, 2 Nd Bauman St 5-1, Moscow 105005, Russia
来源：
SURFACE & COATINGS TECHNOLOGY | 2020年 / 385卷
基金：
俄罗斯科学基金会;
关键词：
Multilayered nanostructured coating; Wear; Metal cutting tool; Nanolayer; MULTILAYER COMPOSITE COATINGS; TRIBOLOGICAL PROPERTIES; DEFORMATION-BEHAVIOR; NITRIDE COATINGS; RESIDUAL-STRESS; PERFORMANCE; FILMS; MICROSTRUCTURE; ADHESION; SYSTEM;
D O I：
10.1016/j.surfcoat.2020.125402
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The paper presents the results of the investigation into the formation of the nanolayer structure of the Ti-TiN-(Ti,Cr,Al)N coating and its influence on the thickness of coatings, their resistance to fracture in scratch testing, and the wear resistance of coated tools in turning 1045 steel. The structure of the coatings with the nanolayer thicknesses of 302, 160, 70, 53, 38, 24, 16, and 10 nm was studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high-resolution (HR) TEM. It is shown that the grain sizes in the nanolayers decrease to certain values with an increase in the thickness of the nanolayers, and then, with a further decrease in the nanolayer thickness, the grain sizes of the nanolayer grow as the interlayer interfaces cease to produce a restraining effect on the growth of the grains. The study found that the nanolayer thickness influenced the wear of carbide cutting tools and the pattern of fracture for the Ti-TiN-(Ti,Cr,Al)N coatings.
引用
收藏
页数：14
相关论文
共 50 条
  • [1] Influence of the Thickness of Multilayer Composite Nano-Structured Coating Ti-TiN-(Ti,Al,Si)N on the Tool Life of Metal-Cutting Tools and the Nature of Wear
    Vereschaka, Alexey
    Grigoriev, Sergey
    Sitnikov, Nikolay
    Aksenenko, Anatoliy
    Milovich, Filipp
    Andreev, Nikolay
    Oganyan, Gaik
    Bublikov, Jury
    COATINGS, 2019, 9 (11)
  • [2] Investigation of the tribological properties of Ti-TiN-(Ti,Al,Nb,Zr)N composite coating and its efficiency in increasing wear resistance of metal cutting tools
    Grigoriev, Sergey
    Vereschaka, Alexey
    Milovich, Filipp
    Migranov, Mars
    Andreev, Nikolay
    Bublikov, Jury
    Sitnikov, Nikolay
    Oganyan, Gaik
    TRIBOLOGY INTERNATIONAL, 2021, 164
  • [3] Investigation of the wear pattern of the Ti-TiN-(Ti,Al,Cr)N nanostructured coating with a varying modulation period
    Grigoriev, Sergey
    Vereschaka, Alexey
    Milovich, Filipp
    Sitnikov, Nikolay
    Bublikov, Jury
    Tabakov, Vladimir
    Seleznev, Anton
    Shektman, Semen
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 115
  • [4] Investigation of the Properties of Ti-TiN-(Ti,Cr,Mo,Al)N Multilayered Composite Coating with Wear-Resistant Layer of Nanolayer Structure
    Grigoriev, Sergey
    Vereschaka, Alexey
    Milovich, Filipp
    Sitnikov, Nikolay
    Andreev, Nikolay
    Bublikov, Jury
    Sotova, Catherine
    Oganian, Gaik
    Sadov, Ilya
    COATINGS, 2020, 10 (12) : 1 - 13
  • [5] Investigation of the properties of Ti-TiN-(Ti,Al,Nb,Zr)N composite coating and its efficiency in increasing wear resistance of metal cutting tools
    Grigoriev, Sergey
    Vereschaka, Alexey
    Milovich, Filipp
    Tabakov, Vladimir
    Sitnikov, Nikolay
    Andreev, Nikolay
    Bublikov, Jury
    Sotova, Catherine
    SURFACE & COATINGS TECHNOLOGY, 2021, 421
  • [6] Influence of the nanostructure of Ti-TiN-(Ti,Al,Cr)N multilayer composite coating on tribological properties and cutting tool life
    Vereschaka, Alexey
    Grigoriev, Sergey
    Tabakov, Vladimir
    Migranov, Mars
    Sitnikov, Nikolay
    Milovich, Filipp
    Andreev, Nikolay
    TRIBOLOGY INTERNATIONAL, 2020, 150
  • [7] Influence of the Ti-TiN-(Y,Ti,Al)N Nanolayer Coating Deposition Process Parameters on Cutting Tool Oxidative Wear during Steel Turning
    Vereschaka, Alexey
    Sotova, Catherine
    Milovich, Filipp
    Seleznev, Anton
    Sitnikov, Nikolay
    Shekhtman, Semen
    Pirogov, Vladimir
    Baranova, Natalia
    NANOMATERIALS, 2023, 13 (23)
  • [8] Investigation of wear and diffusion processes on rake faces of carbide inserts with Ti-TiN-(Ti,Al,Si)N composite nanostructured coating
    Vereschaka, Alexey
    Tabakov, Vladimir
    Grigoriev, Sergey
    Sitnikov, Nikolay
    Andreev, Nikolay
    Milovich, Filipp
    WEAR, 2018, 416 : 72 - 80
  • [9] Investigation of wear mechanisms of multilayer nanostructured wear-resistant coatings during turning of steel. Part 2: Diffusion, oxidation processes and cracking in Ti-TiN-(Ti,Cr,Mo,Al)N coating
    Grigoriev, Sergey
    Vereschaka, Alexey
    Milovich, Filipp
    Andreev, Nikolay
    Bublikov, Jury
    Sitnikov, Nikolay
    Sotova, Catherine
    Kutina, Natalya
    WEAR, 2021, 486-487
  • [10] Influence of thickness of multilayer composite nano-structured coating Ti-TiN-(Ti,Al,Cr)N on tool life of metal-cutting tool
    Vereschaka, Alexey
    Grigoriev, Sergey
    Sitnikov, Nikolay
    Oganyan, Gaik
    Sotova, Catherine
    8TH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (HPC 2018), 2018, 77 : 545 - 548
12345