The effect of decor paper properties and adhesive type on some properties of particleboard

被引:23
作者
Bardak, Selahattin [2 ]
Sari, Bunyamin [1 ]
Nemli, Gokay [1 ]
Kirci, Huseyin [1 ]
Baharoglu, Mehmet [3 ]
机构
[1] Karadeniz Tech Univ, Fac Forestry, Trabzon, Turkey
[2] Artvin Coruh Univ, Fac Forestry, Artvin, Turkey
[3] Giresun Univ, Sebinkarahisar Vocat Sch, Giresun, Turkey
关键词
Particleboard; Decor paper; Adhesive type; Mechanical properties; Paper properties; Grammage; Abrasion resistance; QUALITY; RESINS; WOOD;
D O I
10.1016/j.ijadhadh.2011.02.008
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
In this study, the effects of decor paper grammage (weight per unit area) and adhesive type on the tearing index, breaking length, and mechanical (modulus of rupture and modulus of elasticity) of the decorative papers, and surface quality (abrasion resistance) properties of the overlaid particleboard panels were investigated. As the raw decor paperweight was increased, the properties of the paper, and mechanical properties and abrasion resistance of the overlaid panels were significantly improved. It appears that the decor paper grammage is the parameter, other than scratch resistance, which determines the end use of the particleboard surfaces with decor paper. While the adhesive type was found to influence the abrasion resistance, it did not statistically affect the mechanical properties of particleboard. In addition, melamine formaldehyde caused better abrasion resistance than did the urea formaldehyde and melamine urea formaldehyde. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:412 / 415
页数:4
相关论文
共 26 条
[1]  
[Anonymous], 1998, INTERNAL TEARING RES
[2]  
[Anonymous], 2005, 312 EN EUR COMM STAN
[3]  
[Anonymous], 1996, PARTICLEBOARD START
[4]  
[Anonymous], 1993, 310 EN EUR COMM STAN
[5]  
Barret R., 1993, AMINO RESINS SURFACE
[6]   Urea-formaldehyde (UF) adhesive resins for wood [J].
Dunky, M .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1998, 18 (02) :95-107
[7]  
Dunky M, 1995, P WOOD ADHESIVES, P77
[8]  
Enzensberger W., 1961, Holz als Roh- und Werkstoff, V19, P394, DOI 10.1007/BF02630378
[9]  
EROGLU H, 2000, FIBERBOARD MANUFACTU
[10]   Use of NIR for structural characterization of urea-formaldehyde resins [J].
Minopoulou, E ;
Dessipri, E ;
Chryssikos, GD ;
Gionis, V ;
Paipetis, A ;
Panayiotou, C .
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2003, 23 (06) :473-484