Effects of the heterogeneity in the electron beam welded joint on fatigue crack growth in Ti-6Al-4V alloy

被引：39

作者：

Li, Xingzhi ^{[1
]}

Hu, Shubing ^{[1
]}

Xiao, Jianzhong ^{[1
]}

Ji, Longbo ^{[1
]}

机构：

[1] Huazhong Univ Sci & Technol, State Key Lab Mat Proc & Die Mould Technol, Wuhan 430074, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2011年 / 529卷

关键词：

Titanium alloys; Fatigue; Heterogeneity; Electron beam welding; TITANIUM-ALLOY; RESIDUAL-STRESS; MICROSTRUCTURE; BEHAVIOR; PROPAGATION; FRACTURE; PLATE;

D O I：

10.1016/j.msea.2011.09.014

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The heterogeneity of electron beam (EB)-welded joints in thick Ti-6Al-4V alloy plates is defined and described. The microstructure, hardness, and fatigue crack growth rate (FCGR) in the fuse zone (FZ) and the heat-affected zone (HAZ) of thick Ti-6Al-4V alloy EB-welded joint are studied using a new testing and interception method. The fatigue fractographs, crack growth paths and the microscopic deformation are observed through scanning and transmission electron microscopy. The effect mechanism of heterogeneity in the electron beam weld joint to FCGRs is discussed. The results reveal that FCGR is higher in the HAZ than in the FZ, mainly because of the effect of heterogeneity! of the welded joint. Heterogeneity II increases from the top to the root of the welding seam while the size of the alpha' phase decreases. Consequently, FCGR is higher at the root of the welding seam. Heterogeneity in the joint is found to greatly influence the FCGR. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.

引用

页码：170 / 176

页数：7

共 50 条

[21] Effects of tool wear on friction stir welded joints of Ti-6Al-4V alloy
Nasresfahani, A. R.
Soltanipur, A. R.
Farmanesh, K.
Ghasemi, A.
MATERIALS SCIENCE AND TECHNOLOGY, 2017, 33 (05) : 583 - 591
[22] Increasing the Fatigue Durability of an 3D-Printed Ti-6Al-4V Alloy Electron-Beam Welded Joint by Ultrasonic Electropulsing Shock Treatment
Perevalova, O. B.
Panin, A. V.
Boyangin, E. N.
Kazachenok, M. S.
Martynov, S. A.
PHYSICS OF METALS AND METALLOGRAPHY, 2022, 123 (12) : 1201 - 1207
[23] Microstructure and fatigue crack growth behavior of heat-treated electron beam melted Ti-6Al-4V alloy
Ranjan, Anish
Astarita, Antonello
Franchitti, Stefania
Arora, Amit
Mishra, Sushil
Singh, Amit Kumar
INTERNATIONAL JOURNAL OF FATIGUE, 2024, 189
[24] Effects of Shot-Peening on Fretting Fatigue Crack Growth Behavior in Ti-6Al-4V
Mall, S.
Jain, V. K.
Fadag, H. A.
STRAIN, 2011, 47 : E305 - E318
[25] The role of crack origin size and early stage crack growth on high cycle fatigue of powder metallurgy Ti-6Al-4V alloy
Cao, Fei
Chandran, K. S. Ravi
INTERNATIONAL JOURNAL OF FATIGUE, 2017, 102 : 48 - 58
[26] Influence of heat treatment on fatigue crack growth in Ti-6Al-4V alloy
Rozumek, Dariusz
MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE, 2011, 465 : 463 - 466
[27] Role of microstructure on the fatigue crack propagation behavior of a friction stir welded Ti-6Al-4V
Muzvidziwa, Milton
Okazaki, Masakazu
Suzuki, Kenji
Hirano, Satoshi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 652 : 59 - 68
[28] Fatigue crack growth parameters of Laser Powder Bed Fusion produced Ti-6Al-4V
Macallister, Nicolas
Vanmeensel, Kim
Becker, Thorsten Hermann
INTERNATIONAL JOURNAL OF FATIGUE, 2021, 145
[29] Microstructure evolution and fatigue crack growth of diffusion bonded Ti-6Al-4V titanium alloy
Li, Tianle
Zhong, Lixin
Wu, Huiping
An, Dayong
Li, Xifeng
Chen, Jun
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 918
[30] Study on Biomedical Porous Ti-6Al-4V Alloy Fabricated by Electron Beam Selective Melting
Tang Huiping
Yang Guangyu
Liu Haiyan
Liu Nan
Jing Peng
Li Zengfeng
Huang Yuanping
RARE METAL MATERIALS AND ENGINEERING, 2014, 43 : 127 - 131

← 1 2 3 4 5 →