EVALUATION OF HYDRAULIC AND THERMAL CHARACTERISTICS OF INTERCONNECTED PARALLEL FLOW MINI HEAT SINK

被引：0

作者：

Uddin, Md Wasi ^{[1
]}

Ayon, Hassan Shahriar ^{[1
]}

Mehrab, Tahmid Mohammad ^{[1
]}

Sifat, Najmus Saquib ^{[1
]}

机构：

[1] Mil Inst Sci & Technol, Dhaka, Bangladesh

来源：

PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 11 | 2021年

关键词：

Mini-channel heat sink; heat transfer; hydraulic characteristics; rectangular fin with rounded ends; pressure drop; PRESSURE-DROP; PERFORMANCE; SINGLE; NANOFLUID;

D O I：

暂无

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This study represents a numerical investigation of the compatibleness of mini- channel heat sink with high heat dissipation rate and the fluid flow patterns inside mini-channels for integrating secondary channel (or interconnector). A novel shape, rectangular fin with rounded ends, mini-channel heat sink was proposed to compare with the thermal performance of rectangular finned and oblique finned mini-channel heat sink. In this study, hydrodynamic characteristics of water as coolant was considered in the single- phase regime, and the flow was considered under laminar flow conditions at Reynolds numbers range of 150 to 1050 with a constant heat flux of 200 KW/m2 at the bottom surface of the mini-channel heat sink. Thereafter, a Performance Evaluating Criteria (PEC) was implemented for all cases to compare with the conventional mini- channel heat sink. The results showed that the overall.... number for newly proposed rectangular fin with rounded ends shape mini-channel heat sink increases slightly with Re number when compared with the conventional mini-channel heat sink. The slight increment of Nu number was recorded at Re=1050 for the newly proposed mini-channel heat sink up to similar to 8% as compared to the conventional parallel flow mini-channel heat sink.

引用

页数：10

共 17 条

[1] An experimental investigation of single-phase forced convection in microchannels
Adams, TM
Abdel-Khalik, SI
Jeter, SM
Qureshi, ZH
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1998, 41 (6-7) : 851 - 857
[2] A parametric investigation of heat transfer and friction characteristics in cylindrical oblique fin minichannel heat sink
Fan, Yan
Lee, Poh Seng
Jin, Li-Wen
Chua, Beng Wah
Zhang, Ding-Cai
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 68 : 567 - 584
[3] Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging
Fedorov, AG
Viskanta, R
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2000, 43 (03) : 399 - 415
[4] An experimental study on thermal performance of Al2O3/water nanofluid in a minichannel heat sink
Ho, C. J.
Chen, W. C.
[J]. APPLIED THERMAL ENGINEERING, 2013, 50 (01) : 516 - 522
[5] Fundamental issues related to flow boiling in minichannels and microchannels
Kandlikar, SG
[J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2002, 26 (2-4) : 389 - 407
[6] Lee YJ, 2010, INTERSOC C THERMAL T
[7] 2-EQUATION EDDY-VISCOSITY TURBULENCE MODELS FOR ENGINEERING APPLICATIONS
MENTER, FR
[J]. AIAA JOURNAL, 1994, 32 (08) : 1598 - 1605
[8] CFD modeling (comparing single and two-phase approaches) on thermal performance of Al2o3/water nanofluid in mini-channel heat sink
Moraveji, Mostafa Keshavarz
Ardehali, Reza Mohammadi
[J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 44 : 157 - 164
[9] Phillips R.J., 1987, Microchannel Heat Sinks
[10] Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink
Qu, WL
Mudawar, I
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (12) : 2549 - 2565

← 1 2 →