Fracture characteristics of the laser bonding joint between the aluminum alloy and the CFRTP with preset aluminum alloy sheet

被引：2
作者：
Luo, Jiebang [1 ]
Bu, Hengchang [1 ]
Wang, Feiyun [1 ]
Zhan, Xiaohong [1 ]
Yu, Min [1 ]
Liu, Dongtao [2 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211106, Peoples R China
[2] Nanjing Inst Adv Laser Technol, Nanjing 210038, Peoples R China
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2022年 / 120卷 / 1-2期
关键词：
Aluminum alloy; CFRTP; Laser joining; Fracture characteristic; Compression molding; COMPOSITES;
D O I：
10.1007/s00170-021-08572-4
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
This paper presents a method to improve the laser bonding joint strength between carbon fiber reinforced thermoplastic composite (CFRTP) and aluminum alloy (Al). In this method, the CFRTP with preset aluminum alloy sheet is attained by the compression molding method after the aluminum alloy sheet is preset between the polyetheretherketone (PEEK) and carbon cloth. The CFRTP with preset aluminum alloy sheet is connected to the aluminum alloy by laser heat source, and the maximum load of the joint can reach 4264 N. Microstructure and fracture surface morphology of joint are observed and analyzed. The results indicate that the interface of the preset aluminum alloy sheet and CFRTP reveals an extensive diffusion of elements compared with the interface of aluminum alloy and CFRTP due to the effect of hot pressing. The fracture failure mode of the lap structure between aluminum alloy and CFRTP is mixed fracture with adhesion fracture as the main component. The fracture position of preset aluminum alloy sheet and aluminum alloy lap structure is observed near the weld seam fusion line, and numerous dimples are found on the fracture surface of aluminum alloy. The increase in joint bonding force is mainly attributed to the collective effect of two lap structures; during the stretching process, the interface between aluminum alloy and CFRTP first undergoes fracture, and then, preset aluminum alloy sheet undergoes plastic fracture failure.
引用
收藏
页码：251 / 263
页数：13
相关论文
共 28 条
  • [1] Investigation of laser joining process of CFRTP and aluminum alloy
    Bu, Hengchang
    Li, Yun
    Yang, Hongyan
    Wang, Leilei
    Zhan, Xiaohong
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2020, 35 (11) : 1251 - 1258
  • [2] Experimental study of laser direct joining of metal and carbon fiber reinforced nylon
    Huang, Chuang
    Wang, Xiao
    Wu, Yanwei
    Meng, Dongdong
    Liu, Huixia
    [J]. 1600, Trans Tech Publications Ltd (620): : 42 - 48
  • [3] An overview of the technology of fibre-reinforced plastics for design purposes
    Edwards, KL
    [J]. MATERIALS & DESIGN, 1998, 19 (1-2): : 1 - 10
  • [4] Fang XW, 2021, MAT SCI ENG A-STRUCT, V800
  • [5] Effect of Scanning Speed with UV Laser Cleaning on Adhesive Bonding Tensile Properties of CFRP
    Gao, Qiyu
    Li, Yun
    Wang, Hong-en
    Liu, Weiping
    Shen, Honglie
    Zhan, Xiaohong
    [J]. APPLIED COMPOSITE MATERIALS, 2019, 26 (04) : 1087 - 1099
  • [6] Laser direct joining of CFRTP and aluminium alloy with a hybrid surface pre-treating method
    Jiao, Junke
    Jia, Shaohui
    Xu, Zifa
    Ye, Yiyun
    Sheng, Liyuan
    Zhang, Wenwu
    [J]. COMPOSITES PART B-ENGINEERING, 2019, 173
  • [7] Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel
    Jung, K. W.
    Kawahito, Y.
    Takahashi, M.
    Katayama, S.
    [J]. MATERIALS & DESIGN, 2013, 47 : 179 - 188
  • [8] Laser direct joining of carbon fibre reinforced plastic to stainless steel
    Jung, K. W.
    Kawahito, Y.
    Katayama, S.
    [J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2011, 16 (08) : 676 - 680
  • [9] Laser direct joining of carbon fiber reinforced plastic to aluminum alloy
    Jung, Kwang-Woon
    Kawahito, Yousuke
    Takahashi, Makoto
    Katayama, Seiji
    [J]. JOURNAL OF LASER APPLICATIONS, 2013, 25 (03)
  • [10] Investigation of optimal lamination condition of CFRTP by compression molding method and a comparison of mechanical properties with CFRTS
    Kim, Dae Won
    Jin, Chul Kyu
    Lee, Min Sik
    Kang, Chung Gil
    Seo, Hyung Yoon
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2020, 12 (12)
123