Pressureless sintering of ultra-high temperature ZrB2-SiC ceramics

被引：8

作者：

Cheng, Zhi-Qiang ^{[1
]}

Zhou, Chang-Ling ^{[2
,3
]}

Tian, Ting-Yan ^{[2
]}

Sun, Cheng-Gong ^{[2
]}

Shi, Zhi-Hong

Fan, Jie ^{[2
]}

机构：

[1] Wuhan Univ Technol, Sch Mat Sci & Engn, Wuhan 430070, Peoples R China

[2] Shandong Res & Design Inst Ind Ceram, Zibo 255031, Peoples R China

[3] Jinan Univ, Sch Mat Sci & Engn, Jinan 250022, Peoples R China

来源：

HIGH-PERFORMANCE CERAMICS V, PTS 1 AND 2 | 2008年 / 368-372卷

关键词：

ZrB2-SiCUHTCs; pressureless sintering; crystallization annealing; ablation resistance; MECHANICAL-PROPERTIES; MICROSTRUCTURE;

D O I：

10.4028/www.scientific.net/KEM.368-372.1746

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

ZrB2-SiC ultra-high temperature ceramics (UHTCs) were pressureless sintered with Y2O3-Al2O3 as the sintering additives. The effects of sintering additive and crystallization annealing on the microstructure and properties of ZrB2-SiC UHTCs were investigated. Sintering was activated by producing liquid phase of Y2O3 and Al2O3. The relative density of sintered ZrB2-20wt%SiC ceramic could reach 96% when the content of sintering additive was 6% and the sintering temperature was 1750 degrees C and its bending strength, Vickers hardness, and fracture toughness were 412 Mpa, 13 GPa, and 6.0 MPa.ml(1/2), respectively. The crystallization annealing can result in YAG phase from grain boundary and enhance the high temperature properties of the UHTCs. The UHTCs have excellent ablation resistance at ultra-high temperatures, and a very low ablation rate of 0.0006 mm/s after ablation for 900s at 2800 degrees C.

引用

页码：1746 / +

页数：2

共 50 条

[41] Pressureless sintering of ZrB2-SiC composite laminates using boron and carbon as sintering aids
Padovano, E.
Badini, C.
Biamino, S.
Pavese, M.
Yang, W. S.
Fino, P.
ADVANCES IN APPLIED CERAMICS, 2013, 112 (08) : 478 - 486
[42] Ultra High Temperature Oxidation Resistance and Strength of ZrB2-SiC Ceramics in Reduced Pressure Plasma
Oguri, Kazuyuki
Sekigawa, Takahiro
Kamita, Tohru
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2011, 75 (05) : 291 - 296
[43] Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites
Kashyap, Sunil Kumar
Mitra, Rahul
CERAMICS INTERNATIONAL, 2020, 46 (04) : 5028 - 5036
[44] Fabrication and improved properties of ZrC-SiC-ZrB2 ceramics by ultra-high pressure sintering
Ke, Boren
Zou, Ji
Wang, Weimin
Ji, Wei
Fu, Zhengyi
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2024, 44 (12) : 7405 - 7410
[45] Microstructure and mechanical properties of ZrB2-SiC composites prepared by gelcasting and pressureless sintering
Zhang, Rubing
He, Rujie
Zhang, Xinghong
Fang, Daining
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2014, 43 : 83 - 88
[46] In situ synthesis of ultrafine ZrB2-SiC composite powders and the pressureless sintering behaviors
Yan, Yongjie
Zhang, Hui
Huang, Zhengren
Liu, Jianxue
Jiang, Dongliang
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2008, 91 (04) : 1372 - 1376
[47] Preparation and Assessment of C/C-ZrB2-SiC Ultra-High Temperature Ceramics
Fan, Jie
Zhou, Chang-ling
Wang, Chong-hai
Wang, Yan-yan
Liu, Rui-xiang
HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 719 - 722
[48] Production of complex microchanneled parts of ZrB2-MoSi2 ultra-high temperature ceramics by freeze casting and pressureless spark plasma sintering
Ortiz, Angel L.
Miranda, Pedro
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2025, 45 (02)
[49] COMPRESSIVE STRENGTH DEGRADATION IN ZrB2-SiC AND ZrB2-SiC-C ULTRA HIGH TEMPERATURE COMPOSITES
Ramirez-Rico, J.
Bautista, M. A.
Martinez-Fernandez, J.
Singh, M.
MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES IV, 2010, 30 (02): : 127 - +
[50] High temperature mechanical properties of laminated ZrB2-SiC based ceramics
Wei, Chuncheng
Liu, Xinchao
Niu, Jinye
Feng, Liu
Yue, Hongzhi
CERAMICS INTERNATIONAL, 2016, 42 (16) : 18148 - 18153

← 1 2 3 4 5 →