Low-velocity Impact Behaviour of 3-D Glass Fibre Hollow Integrated Core Sandwich Composites

被引:13
|
作者
Cao, Haijian [1 ]
Qian, Kun [1 ]
Wei, Qufu [1 ]
Li, Hongshun [1 ]
机构
[1] Jiangnan Univ, Minist Educ, Key Lab Ecotext, Wuxi 214122, Jiangsu, Peoples R China
关键词
PLATES;
D O I
10.1177/096739111001800401
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In the current work, 3-D glass fibre woven fabric-reinforced composites were fabricated by impregnating epoxy resin in a hand lay-up procedure for the hollow integrated core sandwich structure. Four types of 3-D structures were investigated in terms of the impact properties as a function of the z-direction fibre length (5, 6 and 7 mm) and covered skins (covered with aluminium) in core structures. Impact properties including peak load, time to peak load, and absorbed energy were evaluated. It was found that the 3-D hollow integrated core sandwich composites covered with aluminium skin considerably enhanced the impact resistance. Photographs of the impact damage taken after impact tests were analyzed and discussed in terms of a hollowing on the front face sheet against the load applied, and whitening spread in the impact point on the back face sheet of the composites was also studied.
引用
收藏
页码:175 / 179
页数:5
相关论文
共 39 条
  • [21] Low-velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites: Influence of impactor geometry and impact velocity
    Dhakal, H. N.
    Zhang, Z. Y.
    Bennett, N.
    Reis, P. N. B.
    COMPOSITE STRUCTURES, 2012, 94 (09) : 2756 - 2763
  • [22] Experimental investigation on low-velocity impact behavior of glass, Kevlar, and hybrid composites with an elastomeric polyurethane matrix
    Vescovini, Alessandro
    Cruz, Joziel A.
    Ma, Dayou
    Colombo, Chiara
    Salerno, Antonio
    Bianchi, Otavio
    Amico, Sandro C.
    Manes, Andrea
    COMPOSITES PART C: OPEN ACCESS, 2024, 13
  • [23] Low-velocity impact response of cylindrical sandwich shells with auxetic 3D double-V meta-lattice core and FG GRC facesheets
    Li, Chong
    Shen, Hui -Shen
    Yang, Jian
    OCEAN ENGINEERING, 2022, 262
  • [24] Analytical study on the low-velocity impact penetration of the fully-clamped foam-core composite sandwich panels
    Wang, Heran
    Long, Shuchang
    Yao, Xiaohu
    Lu, Guoxing
    Zhang, Xiaoqing
    Han, Qiang
    COMPOSITES PART B-ENGINEERING, 2021, 224
  • [25] Dynamic response of clamped sandwich beams with foam-filled sinusoidal corrugated core subjected to low-velocity impact
    Wang, Yao
    Guo, Yafei
    Wu, Hai
    Kan, Qianhua
    Liu, Hu
    Zhang, Jianxun
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024,
  • [26] Low-velocity impact response and damage mechanism of cosine function cell-based lattice core sandwich panels
    Zhu, Guohua
    Ren, Haoqian
    Wang, Zhen
    Wei, Lulu
    Zhao, Xuan
    THIN-WALLED STRUCTURES, 2024, 205
  • [27] 3D finite element simulation of sandwich panels with a functionally graded core subjected to low velocity impact
    Etemadi, E.
    Khatibi, A. Afaghi
    Takaffoli, M.
    COMPOSITE STRUCTURES, 2009, 89 (01) : 28 - 34
  • [28] Layer-wise damage prediction in carbon/Kevlar/S-glass/E-glass fibre reinforced epoxy hybrid composites under low-velocity impact loading using advanced 3D computed tomography
    Vasudevan, A.
    Kumaran, S. Senthil
    Naresh, K.
    Velmurugan, R.
    INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2020, 25 (01) : 9 - 23
  • [29] Stress distribution of a cylindrical sandwich sector with FG-CNT core and piezoelectric face sheets subjected to low-velocity impact
    Raissi, Hamed
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2022, 236 (02) : 630 - 652
  • [30] Dynamic analysis of a spherical sandwich sector with piezoelectric face sheets and FG-CNT core subjected to low-velocity impact
    Raissi, Hamed
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2021, 43 (07)