Enhancement of Cogging Torque Reduction on Inset Permanent Magnet Generator by Using Magnet Edge Shaping Method

被引：0
作者：
Nur, Tajuddin [1 ]
Herlina [2 ]
机构：
[1] Atma Jaya Catholic Univ, Dept Elect Engn, Jakarta, Indonesia
[2] Sriwijaya Univ, Dept Elect Engn, Inderalaya, South Sumatera, Indonesia
来源：
2018 INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING AND COMPUTER SCIENCE (ICECOS) | 2018年
关键词：
Inset-PMG; Cogging Torque; Finite Element; Slot Opening Width; Permanent Magnet Shaping; MACHINE; MOTORS;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
This paper handled with the investigation of the cogging torque reduction method in Inset Permanent Magnet Generators using fractional slot stator/rotor combination. Cogging torque of Inset Permanent Magnet Generator is analyzed to be cut down by slot opening width reduction and permanent magnets shaping. Electromagnetic simulations of the Inset-PMG in this paper were implemented by applying finite element analysis. Finite element method magnetic (FEMM 4.2) tool is employed to determine and analyze the cogging torque. It can be proved that by mixing of slot opening reduction and permanent magnet shaping at a particular shoe height can diminish the cogging torque of Inset-Permanent Magnet Generator sharply.
引用
收藏
页码：429 / 434
页数：6
相关论文
共 32 条
[1]   Design techniques for reducing the cogging torque in surface-mounted PM motors [J].
Bianchi, N ;
Bolognani, S .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2002, 38 (05) :1259-1265
[2]   Advantages of inset PM machines for zero-speed sensorless position detection [J].
Bianchi, Nicola ;
Bolognani, Silverio ;
Jang, Ji-Hoon ;
Sul, Seung-Ki .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2008, 44 (04) :1190-1198
[3]   Influence of machine symmetry on reduction of cogging torque in permanent-magnet brushless motors [J].
Bretón, C ;
Bartolomé, J ;
Benito, JA ;
Tassinario, G ;
Flotats, I ;
Lu, CW ;
Chalmers, BJ .
IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (05) :3819-3823
[4]   Optimization of Permanent Magnet Surface Shapes of Electric Motors for Minimization of Cogging Torque Using FEM [J].
Chen, Ningning ;
Ho, S. L. ;
Fu, W. N. .
IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (06) :2478-2481
[5]  
Chikouche Brahim L., 2015, Progress In Electromagnetics Research B, V62, P49
[6]   Cogging Torque Reduction in Permanent-Magnet Brushless Generators for Small Wind Turbines [J].
Chung, Dae-Won ;
You, Yong-Min .
JOURNAL OF MAGNETICS, 2015, 20 (02) :176-185
[7]   Fractional Slot Concentrated Winding Permanent Magnet Synchronous Machine With Consequent Pole Rotor for Low Speed Direct Drive [J].
Chung, Shi-Uk ;
Kim, Jong-Moo ;
Koo, Dae-Hyun ;
Woo, Byung-Chul ;
Hong, Do-Kwan ;
Lee, Ji-Young .
IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (11) :2965-2968
[8]   Results of the Testing of ITER CC HTS Current Lead Prototypes [J].
Ding, K. ;
Zhou, T. ;
Liu, C. ;
Du, Q. ;
Fernandez, A. Vergara ;
Zhu, S. ;
Devred, A. ;
Bauer, P. ;
Feng, H. ;
Fernandez-Hernando, L. ;
Lu, K. ;
Lee, S. ;
Huang, X. ;
Niu, E. ;
Song, Y. ;
Taylor, T. ;
Yang, Y. .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (04)
[9]   Cogging torque reduction in permanent magnet machines [J].
Dosiek, Luke ;
Pillay, Pragasen .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2007, 43 (06) :1565-1571
[10]  
Gieras J., 2010, PERMANENT MAGNET MOT
1234