Grain growth and particle pinning in a model Ni-based superalloy

被引：112

作者：

Song, Kai ^{[1
]}

Aindow, Mark ^{[1
]}

机构：

[1] Univ Connecticut, Inst Mat Sci, Storrs, CT 06269 USA

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 479卷 / 1-2期

关键词：

grain growth; Ni-based superalloy; particle pinning; limiting grain size;

D O I：

10.1016/j.msea.2007.09.055

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An experimental study has been performed on the grain growth in a model Ni-based superalloy, with particular emphasis on the pinning effect of the second-phase particles. Extensive annealing experiments were performed, and the microstructural development was evaluated in detail using scanning and transmission electron microscopy. It was found that grain growth was strongly inhibited by the pinning effect of both the coarse gamma' phase and the inert precipitates. For samples heat-treated at temperatures below the gamma' solvus (1143 degrees C), the limiting grain size was determined by the size and volume fraction of the gamma' phase. For samples heat-treated at super-solvus temperatures, the stability of the MC-type carbides and yttrium oxides led to a nearly constant Zener limiting grain size over the temperature range 1143-1244 degrees C. Samples heat-treated at 1270 degrees C bad larger grain sizes due to the coarsening and/or dissolution of the MC-type carbides and yttrium oxides. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：365 / 372

页数：8

共 21 条

[1] Modelling the optimum grain size on the low cycle fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites [J].