Toward Automatic Subsurface Pipeline Mapping by Fusing a Ground-Penetrating Radar and a Camera

We propose a novel subsurface pipeline mapping and 3D reconstruction method by fusing ground-penetrating radar (GPR) scans and camera images. To facilitate the simultaneous detection of multiple pipelines, we model the GPR sensing process and prove hyperbola response for general scanning with nonperpendicular angles. Furthermore, we fuse visual simultaneous localization and mapping outputs, encoder readings with GPR scans to classify hyperbolas into different pipeline groups. We extensively apply the J-linkage method and maximum likelihood estimation with error analysis to improve algorithm robustness and accuracy. As a result, we optimally estimate the radii and locations of all pipelines. We have implemented our method and tested it in physical experiments with representative pipeline configurations. Two different kinds of 3-m-long pipes are used, with radii being 4.62 and 3.02 cm, respectively. The results show that our method successfully reconstructs all subsurface pipes. Moreover, the average estimation errors for two orientation angles of pipelines are 1.73 degrees and 0.73 degrees, respectively. The average localization error is 4.47 cm. Note to Practitioners-Automatic and accurate underground pipeline mapping technology is very important in civil construction projects. Lack of 3D utility pipeline maps may lead to accidental damage in civil construction and maintenance. Although ground-penetrating radar (GPR-based pipeline mapping methods have been studied for several years, these methods require the perpendicular scanning with respect to the pipe, which is impossible to guarantee in practice since the orientations of pipelines are unknown. Furthermore, these traditional methods can only estimate one pipeline at a time in a survey area and require prior knowledge of pipe diameter. We propose a robotic subsurface pipeline mapping method with a GPR and a camera to handle difficult factors such as multiple pipes, unknown pipeline orientation, and unknown pipeline diameters. Hence, we can perform GPR scanning along any generic linear trajectories. Our method has been tested in physical experiments with representative pipeline configurations. The results are sufficiently accurate, and it proves that our method can be an effective technology to reconstruct the underground pipelines.