A new energy-efficient and environmentally friendly process to produce magnesium

被引:19
作者
Fu, Daxue [1 ,2 ]
Zhang, Ting'an [1 ,2 ]
Dou, Zhihe [1 ,2 ]
Guan, Lukui [1 ,2 ]
机构
[1] Northeastern Univ, Sch Met, Shenyang, Liaoning, Peoples R China
[2] Educ Minist, Key Lab Ecol Utilizat Multimet Intergrown Ores, Shenyang, Liaoning, Peoples R China
基金
中国国家自然科学基金;
关键词
Magnesium; vacuum; pre-prepared pellet; Pidgeon process; thermal reduction; SILICOTHERMIC REDUCTION; CARBOTHERMIC REDUCTION; CALCINED DOLOMITE; DECOMPOSITION; ATMOSPHERE;
D O I
10.1080/00084433.2017.1361178
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
A new process for magnesium production was proposed in which both the calcination stage and the reduction stage are performed in one retort. Thermal analysis and vacuum reduction experiments were carried out for evaluating the feasibility of the process. The results suggested that ferrosilicon and CaF2 reduced the decomposition temperature of dolomite in the pre-prepared pellets, which was approximately 40 K lower than that of pure dolomite pellet. The reduction ratio larger than 90% was obtained at 1573 K for 3 h in the process. The element Fe may not participate in the reduction reactions, which were caused by the diffusion of Si. Magnesium sheet with a high crystallinity and magnesium powder containing a small amount of magnesia were obtained from the present experiments.
引用
收藏
页码:418 / 425
页数:8
相关论文
共 32 条
[21]  
Wen M., 2013, MAGNESIUM TECHNOLOGY, P75
[22]  
[文明 Wen Ming], 2014, [真空科学与技术学报, Chinese Journal of Vacuum Science and Technology], V34, P1242
[23]  
WINAND R, 1990, T I MIN METALL C, V99, pC105
[24]   Kinetic analysis of silicothermic process under flowing argon atmosphere [J].
Wulandari, W. ;
Brooks, G. A. ;
Rhamdhani, M. A. ;
Monaghan, B. J. .
CANADIAN METALLURGICAL QUARTERLY, 2014, 53 (01) :17-25
[25]  
Wynnyckyj J.R., 1971, Metallurgical Transactions, V2, P979, DOI DOI 10.1007/BF02664228
[26]  
[谢卫东 Xie Weidong], 2012, [稀有金属, Chinese Journal of Rare Metals], V36, P213
[27]  
Xu RY, 2003, MAGNESIUM PRODUCTION, V7003, P231
[28]  
Zhang R.-Q., 2014, Thesis.
[29]  
Zhang T.A., 2015, [No title captured], Patent No. [CN104946906A, 104946906]
[30]  
Zhang TA, 2013, Patent, Patent No. [CN102965524-A, 102965524]