Destructive Analysis-Based Testing for Cured-in-Place Pipe

被引:11
作者
Alzraiee, Hani [1 ]
Bakry, Ibrahim [1 ]
Zayed, Tarek [1 ]
机构
[1] Concordia Univ, Dept Bldg Civil & Environm Engn, Montreal, PQ H3G 1M7, Canada
关键词
Cured-in-place pipe (CIPP); Trenchless; Rehabilitation; Sewer systems; Destructive tests;
D O I
10.1061/(ASCE)CF.1943-5509.0000567
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Trenchless rehabilitation techniques such as cured-in-place pipe (CIPP) had been adopted by many municipalities in the province of Quebec to renew their aging sewer systems. Currently CIPP represents the largest market share of the utilized trenchless rehabilitation techniques in the province of Quebec. Considerable funding is being directed towards sewer systems rehabilitation projects. However, there have been little studies on the performance of the rehabilitated sewers, expected life of the liner, and its structural properties. Therefore, in an effort to address this shortcoming, this paper presents the outcome of a destructive testing protocol conducted on liners samples extracted from sewers rehabilitated using CIPP. Samples used in the testing process were collected from two locations in the sewer network that were rehabilitated over 1 decade ago. Testing the liner included examining the physical properties (e.g., thickness, annular gap, and so on), flexural properties, and tensile properties. The results demonstrate excellent current structural properties and strongly indicate that the liner will meet the anticipated lifetime. Deterioration of liner is expected to take place at a low rate. This conclusion remains valid as long as the current factors influencing structural properties do not change drastically over time. (C) 2014 American Society of Civil Engineers.
引用
收藏
页数:9
相关论文
共 19 条
[1]   A pilot study for retrospective evaluation of cured-in-place pipe (CIPP) rehabilitation of municipal gravity sewers [J].
Allouche, E. ;
Alam, S. ;
Simicevic, J. ;
Sterling, R. ;
Condit, W. ;
Matthews, J. ;
Selvakumar, A. .
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2014, 39 :82-93
[2]  
Allouche N., 2003, P INT PIP C
[3]  
[Anonymous], 1997, D79007 ASTM
[4]  
[Anonymous], 2004, ASTM D 638
[5]  
Araujo T., 2009, P INT NO DIG C N AM
[6]  
ASTM, 2003, ASTM-D638
[7]  
*ASTM, 1999, D790 ASTM
[8]  
ASTM, 2007, F121607B ASTM
[9]  
British Standards, 1995, 178 EN ISO BRIT STAN
[10]  
Chughtai F., 2007, Proc., P1, DOI 10.1061/40934(252)25