Application and Development of High-Efficiency Abrasive Finishing

被引：3

作者：

Li, Changhe ^{[1
]}

Qi, Lingyun ^{[1
]}

Zhao, Huayang ^{[1
]}

机构：

[1] Qingdao Technol Univ, Sch Mech Engn, Qingdao 266033, Peoples R China

来源：

MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5 | 2011年 / 189-193卷

关键词：

Abrasive Finishing; Grinding; Super-High Speed Grinding; High Efficiency Deep-Cut Grinding; Belt Grinding;

D O I：

10.4028/www.scientific.net/AMR.189-193.3113

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

High-efficiency abrasive machining is one of the important technology of advanced manufacture. Combined with raw and finishing machining, it can attain high removal rate like turning, milling and planning. The difficult-to-grinding materials can also be ground by means of this method with high performance. In the present paper, development status and latest progresses on high efficiency abrasive machining technologies relate to high speed and super-high speed grinding, high efficiency deep-cut grinding, hard and brittle materials high-efficiency grinding, powerful grinding and belt grinding were summarized. The efficiency and parameters range of these abrasive machining processes were compared. The key technologies of high efficiency abrasive machining, including grinding wheel, spindle and bearing, grinder, coolant supplying, installation and orientation of wheel and workpiece and safety defended, as well as intelligent monitor and NC grinding were investigated.

引用

页码：3113 / 3116

页数：4

共 7 条

[1] Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding [J].

Huang, H ;

Liu, YC .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (08) :811-823

[2] Analytical thermal models of oblique moving heat source for deep grinding and cutting [J].

Jin, T ;

Cai, GQ .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2001, 123 (02) :185-190

[3] Model and simulation of slurry velocity and hydrodynamic pressure in abrasive jet finishing with grinding wheel as restraint [J].

Li, Changhe ;

Hou, Yali ;

Xiu, Shichao ;

Cai, Guangqi .

ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 :449-+

[4]

Li Changhe, 2005, China Mechanical Engineering, V16, P2116

[5] Process monitoring in grinding [J].

Tönshoff, HK ;

Friemuth, T ;

Becker, JC .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2002, 51 (02) :551-571

[6]

Tönshoff HK, 1998, CIRP ANNALS 1998 - MANUFACTURING TECHNOLOGY, VOL 47/2/1998, P651

[7] Study of ultra-high speed grinding mechanism with molecular dynamics simulation [J].

Zhao, HH ;

Feng, BF ;

Cai, GQ .

ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2 :302-306

← 1 →