Loofah-derived activated carbon supported on nickel foam (AC/Ni) electrodes for the electro-sorption of ammonium ion from aqueous solutions

Activated carbon (AC), prepared from dried loofah sponge, was supported on nickel foam to fabricate AC/Ni electrodes. The characteristics of ammonium electrosorption on AC/Ni electrodes was studied. Results showed that AC prepared in one-step activation (without pre-pyrolysis), i.e., OAC, had relatively low crystallinity, high mesoporosity, and high specific capacitance compared to those made in two-step carbonation followed by activation. Adsorption and desorption density of NH4+ were measured at constant potential of -1.0 V (vs. Hg/HgO) and +0.1 V (vs. Hg/HgO), respectively. Non-faradaic charging contributed to the electrochemical storage and adsorption of ammonium ions on the AC surface with a maximal charge efficiency of 80%, at an applied potential of -1.0 V (vs. Hg/HgO). Multiple-layer adsorption isotherm better described the electrosorption of ammonium ion on OAC/Ni electrodes yielding a maximum adsorption capacity of 6 mg-N g(-1), which was comparable with other similar systems. Overall, results clearly demonstrated the effect of synthesis strategy on the capacitive charging behaviors of AC/Ni electrodes and its relationship to NH4+ electrosorption. (C) 2019 Elsevier Ltd. All rights reserved.