Experimental investigation on deformation and strength of carbon/epoxy laminated curved beams

被引：116

作者：

Hao, Wenfeng ^{[1
]}

Ge, Dongyun ^{[1
]}

Ma, Yinji ^{[1
]}

Yao, Xuefeng ^{[1
]}

Shi, Yue ^{[1
]}

机构：

[1] Tsinghua Univ, Dept Engn Mech, Appl Mech Lab, Beijing 100084, Peoples R China

来源：

POLYMER TESTING | 2012年 / 31卷 / 04期

关键词：

Laminated curved beam; Digital speckle correlation method; Four-point-bending; Interlaminar deformation; Delamination; NUMERICAL-ANALYSIS; TENSILE-STRENGTH; DELAMINATION;

D O I：

10.1016/j.polymertesting.2012.02.003

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Both the deformation and strength of carbon/epoxy laminated curved beams with variable curvature and thickness are studied experimentally using the Digital Speckle Correlation Method (DSCM) and a Four-Point-Bending test configuration. First, the relationships between the strain and the applied load on the curved beams with different thicknesses and different radius-thickness ratios are studied. Second, both the failure strength and the maximum interlaminar radial stresses of the curved beams are determined, and the distribution and evolution of full field strain in the laminated curved beams are obtained using DSCM. Finally, the interlaminar deformation and delamination mechanisms of carbon/epoxy laminated curved beams are analyzed. These results play an important role for predicting strength and evaluating lifetime of laminated curved beams. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：520 / 526

页数：7

共 19 条

[1]

[Anonymous], D6415D6415M ASTM INT

[2] Simulation of low velocity impact on fiber laminates using a cohesive zone based delamination model [J].

Borg, R ;

Nilsson, L ;

Simonsson, K .

COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (02) :279-288

[3] Interlaminar tensile strength (ILTS) measurement of woven glass/polyester laminates using four-point curved beam specimen [J].

Cui, WC ;

Liu, T ;

Len, JX ;

Ruo, RB .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1996, 27 (11) :1097-1105

[4] A linear model for the static and dynamic analysis of non-homogeneous curved beams [J].

Ecsedi, I ;

Dluhi, K .

APPLIED MATHEMATICAL MODELLING, 2005, 29 (12) :1211-1231

[5] Numerical analysis of the elastic constants' effect on the delamination propagation in a curved layered composite beam under cyclic shear loading [J].

Figiel, L ;

Zafeiropoulos, NE ;

Lauke, B .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (02) :153-162

[6] Mechanical and thermal fatigue delamination of curved layered composites [J].

Figiel, L ;

Kaminski, M .

COMPUTERS & STRUCTURES, 2003, 81 (18-19) :1865-1873

[7] Numerical analysis of singly curved shallow composite panels under three-point bend load [J].

Guedes, R. M. ;

Sa, Alcides .

COMPOSITE STRUCTURES, 2008, 83 (02) :212-220

[8] FLEXURE OF SIMPLY CURVED COMPOSITE SHAPES [J].

KEDWARD, KT ;

WILSON, RS ;

MCLEAN, SK .

COMPOSITES, 1989, 20 (06) :527-536

[9]

Lekhnitskii S.J., 1968, Anisotropic plates

[10] The closed form general solutions of 2-D curved laminated beams of variable curvatures [J].

Lin, K. C. ;

Hsieh, C. M. .

COMPOSITE STRUCTURES, 2007, 79 (04) :606-618

← 1 2 →