The performances of palm mid olein as lubricant in journal bearing application

被引：0
|
作者：
Zulhanafi, P. [1 ]
Syahrullail, S. [1 ]
Ahmad, Mohamad Ali [2 ]
机构：
[1] Univ Teknol Malaysia, Fac Mech Engn, Skudai 81310, Johor, Malaysia
[2] Univ Teknol MARA, Fac Mech Engn, Shah Alam 40450, Selangor, Malaysia
来源：
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018) | 2018年
关键词：
Journal bearing; palm mid olein; hydrodynamic lubricant;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Journal bearing is one of the major components especially for the equipment dealing with continuous rotating speeds and heavy load. Lubricant also plays an important role to determine the performance of journal bearing. In this study, the pressure distribution of Palm Mid Olein (PMO) lubricant was investigated along the bearing circumferences and compared with Mineral oil based lubricant (SAE 40) using journal bearing test rig. It was found that at lower load, PMO presented higher maximum pressure compared to SAE 40. It was also observed that the increase in radial load caused an increase in maximum pressure. However, the position of maximum pressure has not changed with increasing radial loads.
引用
收藏
页码：382 / 383
页数：2
相关论文
共 48 条
  • [1] Effect of Groove Textures on the Performances of Gaseous Bubble in the Lubricant of Journal Bearing
    Meng, F. M.
    Zhang, L.
    Long, T.
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2017, 139 (03):
  • [2] Bio-based lubricant with additives: tribological performances in hydrodynamic journal bearing
    Norazman, Amanda
    Paiman, Zulhanafi
    Samion, Syahrullail
    Yazid, Muhammad Noor Afiq Witri Muhammad
    Rasep, Zuraidah
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2024, 76 (04) : 474 - 485
  • [3] Ring compression test of aluminum alloy AA6061 using palm mid olein as a metal forming lubricant
    Aiman, Y.
    Syahrullail, S.
    PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2020 (MERD'20), 2020, : 272 - 276
  • [4] Generalized Maxwell Model as Viscoelastic Lubricant in Journal Bearing
    Guemmadi, M.
    Ouibrahim, A.
    ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING, 2011, 478 : 64 - 69
  • [5] On the effects of a compressible viscous lubricant on the load-bearing capacity of a journal bearing
    Bollada, P. C.
    Phillips, T. N.
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 2007, 55 (11) : 1091 - 1120
  • [6] CFD analysis of journal bearing hydrodynamic lubrication by Bingham lubricant
    Gertzos, K. P.
    Nikolakopoulos, P. G.
    Papadopoulos, C. A.
    TRIBOLOGY INTERNATIONAL, 2008, 41 (12) : 1190 - 1204
  • [7] Variation of Lubricant Distribution Across the Radial Direction in a Journal Bearing
    Wei, Shanshan
    Kligerman, Yuri
    Goltsberg, Roman
    Etsion, Izhak
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2022, 144 (06):
  • [8] Fuzzy logic model of journal bearing lubricated with nano lubricant
    Parthasarathy K.
    Baskar S.
    Arumugam S.
    Prabaharan G.
    Shankar M.
    Parthasarathy, K. (parthasarathyk@saec.ac.in), 1600, MechAero Found. for Techn. Res. and Educ. Excellence (12): : 98 - 100
  • [9] Effect of compound dimple on tribological performances of journal bearing
    Meng, F. M.
    Zhang, L.
    Liu, Y.
    Li, T. T.
    TRIBOLOGY INTERNATIONAL, 2015, 91 : 99 - 110
  • [10] THE EFFECT OF OIL VISCOSITY ON THE PERFORMANCES OF A TEXTURED JOURNAL BEARING
    Tala-ighil, Nacer
    Mokhtari, Ahcene
    Chaouche, Amine Brick
    Bettahar, Kheireddine
    Fillon, Michel
    IRF2016: 5TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE, 2016, : 349 - 354
12345