Simulation and analysis of corrosion fracture of reinforced concrete based on phase field method

被引：6
作者：
Xu, Wenqiang [1 ,3 ]
Zhang, Caihong [2 ]
Liu, Haiyang [2 ]
Yang, Jialing [2 ]
Wang, Xusheng [2 ]
Tian, Wei [2 ]
Cao, Kaizhong [2 ]
Zhang, Tianpeng [2 ]
机构：
[1] Hohai Univ, Coll Water Conservancy & Hydropower, Nanjing, Peoples R China
[2] China Construction Seventh Engn Div Corp Ltd, Zhengzhou, Peoples R China
[3] Hohai Univ, Coll Water Conservancy & Hydropower, Nanjing 210098, Peoples R China
来源：
CASE STUDIES IN CONSTRUCTION MATERIALS | 2022年 / 17卷
关键词：
Phase field method; Rebar corrosion; Crack propagation; Numerical simulation; Reinforced concrete; EXTENDED FINITE-ELEMENT; SERVICE LIFE PREDICTION; COVER CRACKING; NONUNIFORM CORROSION; MECHANICAL-PROPERTIES; STEEL CORROSION; PHYSICAL MODEL; SEA STRUCTURES; PROPAGATION; GROWTH;
D O I：
10.1016/j.cscm.2022.e01366
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Reinforced concrete has been widely used. However, it is difficult to accurately simulate the process of concrete damage and destruction caused by rebar corrosion. Therefore, the objective of this work is to solve this difficult problem using a phase field method and analyze the failure process of reinforced concrete. The main importance of this work is to improve the calculation method for the problem, simulate the damage and destruction of concrete cover, and visualize the crack propagation process. Based on the strain softening characteristics of concrete the damage of concrete cover caused by uniform and non-uniform corrosion of rebars is simulated respectively. The simulation results are consistent with the actual observation. The applicability of the phase field method for complex crack propagation in reinforced concrete is verified, which provides a reference for the engineering design and durability research of structures. Analysis of simulation results found that the crack propagation speed is fast for uniform corrosion. Increasing the thickness of concrete cover is benefit to improve the corrosion resistance of structure. However, the crack propagation speed is slow for non-uniform corrosion. The thickness of the cover has no obvious effect on the corrosion damage resistance of structure. For the non-uniform corrosion of multiple rebars, depending on the thickness of concrete cover and the spacing between rebars, the concrete cover presents three typical crack propagation morphologies: wedge-shaped cracks, layered cracks and small local cracks.
引用
收藏
页数：18
相关论文
共 64 条
  • [1] Abirami R, 2020, INT J ADV RES ENG TE, V11
  • [2] Abrishami HH, 1997, ACI STRUCT J, V94, P769
  • [3] Reinforcement corrosion in concrete structures, its monitoring and service life prediction - a review
    Ahmad, S
    [J]. CEMENT & CONCRETE COMPOSITES, 2003, 25 (4-5) : 459 - 471
  • [4] Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials
    Alhozaimy, AM
    Soroushian, P
    Mirza, F
    [J]. CEMENT & CONCRETE COMPOSITES, 1996, 18 (02) : 85 - 92
  • [5] Development of simulation method of concrete cracking behavior and corrosion products movement due to rebar corrosion
    Amalia, Zahra
    Qiao, Di
    Nakamura, Hikaru
    Miura, Taito
    Yamamoto, Yoshihito
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2018, 190 : 560 - 572
  • [6] Critical chloride content in reinforced concrete - A review
    Angst, Ueli
    Elsener, Bernhard
    Larsen, Claus K.
    Vennesland, Oystein
    [J]. CEMENT AND CONCRETE RESEARCH, 2009, 39 (12) : 1122 - 1138
  • [7] [Anonymous], 1998, Approximation of Free-Discontinuity Problems, DOI DOI 10.1007/BFB0097344
  • [8] Rheology, Hydration, and Microstructure of Portland Cement Pastes Produced with Ground Acai Fibers
    Azevedo, Afonso
    de Matos, Paulo
    Marvila, Markssuel
    Sakata, Rafael
    Silvestro, Laura
    Gleize, Philippe
    de Brito, Jorge
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (07):
  • [9] BAZANT ZP, 1979, J STRUCT DIV-ASCE, V105, P1137
  • [10] BAZANT ZP, 1979, J STRUCT DIV-ASCE, V105, P1155
1234567