Numerical and experimental study on the effect of post-weld heat treatment parameters on the relaxation of welding residual stresses

被引：13

作者：

Akbarzadeh, I. ^{[1
]}

Attarha, M. J. ^{[1
]}

Salehi, M. ^{[1
,2
]}

Sattari-Far, I. ^{[1
]}

机构：

[1] Amirkabir Univ Technol, Dept Mech Engn, Tehran 1591634311, Iran

[2] Amirkabir Univ Technol, Concrete Technol & Durabil Res Ctr, Tehran 1591634311, Iran

来源：

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN | 2011年 / 46卷 / 02期

关键词：

welding simulation; post-weld heat treatment; holding time and temperature; creep relaxation; austenitic stainless steel; FATIGUE-CRACK GROWTH; MULTIPASS WELDS; STEEL PIPE; SIMULATION; BEHAVIOR;

D O I：

10.1177/2041313010392867

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, numerical and experimental studies are conducted to investigate the effect of post-weld heat treatment (PWHT) parameters, including holding time and temperature, on the distribution of welding residual stresses. The selected material is AISI type 304 austenitic stainless steel in the form of a pipe, for which the determination of heat treatment parameters is complicated by the risk of intergranular corrosion. The study includes experimental measurements of residual stresses both before and after PWHT of the pipe, and creep and tensile tests to determine the viscoplastic behaviour and mechanical strength of the material. Good agreement between experimental measurements and numerical predictions is obtained; therefore, further simulations were performed to study the effect of variation of heat treatment parameters on the relaxation of welding residual stresses.

引用

页码：79 / 86

页数：8

共 21 条

[1]

AKBARZADEH I, 2010, MAT SCI E A IN PRESS

[2] Comparison of plastic, viscoplastic, and creep models when modelling welding and stress relief heat treatment [J].

Alberg, H ;

Berglund, D .

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2003, 192 (49-50) :5189-5208

[3]

ALBERG H, 2004, 8 INT C NUM METH IND, V240, P2897

[4]

*AM WELD SOC, 1998, WELD HDB AM WELD S 2, V4

[5] Residual stress analysis and fatigue of multi-pass welded tubular structures [J].

Barsoum, Z. .

ENGINEERING FAILURE ANALYSIS, 2008, 15 (07) :863-874

[6] Simulation of welding and stress relief heat treatment of an aero engine component [J].

Berglund, D ;

Alberg, H ;

Runnemalm, H .

FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2003, 39 (09) :865-881

[7] A parametric study of residual stresses in multi-pass butt-welded stainless steel pipes [J].

Brickstad, B ;

Josefson, BL .

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1998, 75 (01) :11-25

[8] Investigation of residual stress and post weld heat treatment of multi-pass welds by finite element method and experiments [J].

Cho, JR ;

Lee, BY ;

Moon, YH ;

Van Tyne, CJ .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 :1690-1695

[9] Stress relief effect on fatigue and relaxation of compression springs [J].

Del Llano-Vizcaya, L. ;

Rubio-Gonzalez, C. ;

Mesmacque, G. ;

Banderas-Hernandez, A. .

MATERIALS & DESIGN, 2007, 28 (04) :1130-1134

[10] Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements [J].

Deng, Dean ;

Murakawa, Hidekazu .

COMPUTATIONAL MATERIALS SCIENCE, 2006, 37 (03) :269-277

← 1 2 3 →