Computer simulation of plasma for plasma immersed ion implantation and deposition with bipolar pulses

被引:19
作者
Miyagawa, Y
Ikeyama, M
Miyagawa, S
Nakadate, H
机构
[1] Natl Inst Adv Ind Sci & Technol, AIST, Chubu Ctr, Moriyama Ku, Nagoya, Aichi 4638510, Japan
[2] PEGASUS Software Inc, Chuo Ku, Tokyo 1040032, Japan
关键词
simulation software; plasma processing; PIII; PBII; PIC-MCC;
D O I
10.1016/S0168-583X(03)00845-0
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
In order to analyze the plasma behavior under the plasma immersion ion implantation and deposition (PIII&D) condition, a newly developed simulation software "PEGASUS" has been used. The spatial distributions of potential, ion and electron density were calculated for trench-shaped target immersed in Ar plasma (1 mTorr, 10(10) cm(-3)). The obtained time dependence of sheath length agreed with the analytical results based on Child-Langmuir theory. In the bipolar pulse PIII&D system, a positive- and a negative- pulse voltage are applied alternately to a target, instead of negative pulses used in the conventional PIII&D method. Using simulation, the following results were obtained; when a negative pulse voltage is applied to a target, a weak plasma is generated around the target. In contrast, when a positive pulse voltage is applied, a more intense plasma is generated under the same conditions. The results obtained by simulation of the behavior of ions and electrons near a trench-shaped target are presented. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:767 / 771
页数:5
相关论文
共 50 条
  • [31] Low temperature plasma immersion ion implantation of nitrogen on a mould steel
    Rossi, S
    Massiani, Y
    Bertassi, E
    Torregrosa, F
    Fedrizzi, L
    THIN SOLID FILMS, 2002, 416 (1-2) : 160 - 168
  • [32] Structural characterization of TiCx films prepared by plasma based ion implantation
    Li, G
    Xia, LF
    THIN SOLID FILMS, 2001, 396 (1-2) : 16 - 22
  • [33] Biocompatibility of titanium based implants treated with plasma immersion ion implantation
    Mändl, S
    Sader, R
    Thorwarth, G
    Krause, D
    Zeilhofer, HF
    Horch, HH
    Rauschenbach, B
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2003, 206 : 517 - 521
  • [34] Particle-in-cell/Monte-Carlo simulation of plasma and neutral gas flow for the inner coating of PET bottles by plasma-based ion implantation.: N2 gas plasma
    Miyagawa, Y
    Tanaka, M
    Nakadate, H
    Ikeyama, M
    Miyagama, S
    PLASMA PROCESSES AND POLYMERS, 2005, 2 (06) : 480 - 484
  • [35] Two switch high voltage modulator for plasma-based ion implantation
    Yukimura, K
    Kuze, E
    Matsunaga, K
    SURFACE & COATINGS TECHNOLOGY, 2002, 156 (1-3) : 66 - 70
  • [36] Surface modification of silicone medical materials by plasma-based ion implantation
    Kobayashi, Tomohiro
    Yokota, Toshihiko
    Kato, Rul
    Suzuki, Yoshiaki
    Iwaki, Masaya
    Terai, Takayuki
    Takahashi, Noriyoshi
    Miyasato, Tomonori
    Ujiile, Hiroshi
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2007, 257 (128-131) : 128 - 131
  • [37] Nitrogen diffusion in medical CoCrNiW alloys after plasma immersion ion implantation
    Lutz, J.
    Lehmann, A.
    Maendl, S.
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (15) : 3747 - 3753
  • [38] Influence of magnetic field on magnetized hydrogen plasmas in plasma immersion ion implantation
    Tang, DL
    Fu, RKY
    Tian, XB
    Peng, P
    Chu, PK
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2003, 206 : 808 - 812
  • [39] Study of AsH3 Plasma Immersion Ion Implantation using PULSION®
    Duchaine, Julian
    Torregrosa, Frank
    Spiegel, Yohann
    Borvon, Gael
    Qin, Shu
    Hu, Yongjun Jeff
    McTeer, Allen
    2014 20TH INTERNATIONAL CONFERENCE ON ION IMPLANTATION TECHNOLOGY (IIT 2014), 2014,
  • [40] Effect of target bias on magnetic field enhanced plasma immersion ion implantation
    Kostov, K. G.
    Barroso, J. J.
    Ueda, M.
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (19-20) : 8403 - 8407