Effect of Recrystallization on Tensile Behavior, Texture, and Anisotropy of Ti-3Al-2.5V Cold Pilgered Tubes

被引：8

作者：

Bayona-Carrillo, Nicolas ^{[1
]}

Bozzolo, Nathalie ^{[2
]}

Fundenberger, Jean-Jacques ^{[1
]}

Thomas, Bertrand ^{[3
]}

Camelin, Patrick ^{[3
]}

Lenarduzzi, Emmanuel ^{[3
]}

Wagner, Francis ^{[1
]}

机构：

[1] Univ Paul Verlaine Metz, LETAM, CNRS, FRE 3143, F-57000 Metz, France

[2] MINES ParisTech, CEMEF Ctr Mise Forme Mat, CNRS, UMR 7635, F-06904 Sophia Antipolis, France

[3] PFW SPECITUBES Hameau Letoquoi, F-62830 Samer, France

来源：

ADVANCED ENGINEERING MATERIALS | 2011年 / 13卷 / 05期

关键词：

EVOLUTION;

D O I：

10.1002/adem.201000328

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The recrystallized volume fraction of Ti 3Al 2.5V seamless tubes is measured using electron BackScatter diffraction (EBSD) after annealing under various conditions. Standard tensile tests and contractile strain ratio (CSR) measurements are carried out in order to analyze the effect of recrystallization on the tensile behavior and the anisotropy of the tubes. The tensile tests show anomalous yield-point phenomena, which become stronger when the recrystallized fraction is increased. CSR value changes through recrystallization, from 0.8 in the cold worked stress relieved (CWSR) state to 1.1 in the fully recrystallized structure. Orientation distribution functions (ODFs) calculated from X-ray data reveal a decay in the intensity of the crystallographic texture as recrystallization advances. This can explain the tendency toward isotropy when complete recrystallization is achieved.

引用

页码：383 / 387

页数：5

共 10 条

[1] Ultrasonic measurement of the Kearns texture factors in zircaloy, zirconium, and titanium [J].