Design optimization and trade-off study of WFXT optics

被引：0

作者：

Conconi, Paolo ^{[1
]}

Pareschi, Giovanni ^{[1
]}

Campana, Sergio ^{[1
]}

Citterio, Oberto ^{[1
]}

Civitani, Marta ^{[1
]}

Cotroneo, Vincenzo ^{[1
]}

Proserpio, Laura ^{[1
]}

Tagliaferri, Gianpiero ^{[1
]}

Parodi, Giancarlo ^{[2
]}

机构：

[1] INAF Osservatorio Astron Brera, Via Bianchi 46, I-23807 Merate, LC, Italy

[2] BCV Progetti, I-20123 Milan, Italy

来源：

OPTICS FOR EUV, X-RAY, AND GAMMA-RAY ASTRONOMY IV | 2009年 / 7437卷

关键词：

Missions; X-ray astronomical instrumentation; X-ray telescopes; wide-field X-ray optics; X-ray astronomical surveys;

D O I：

10.1117/12.827468

中图分类号：

P1 [天文学];

学科分类号：

0704 ;

摘要：

X-ray mirrors are usually built in the Wolter I (paraboloid-hyperboloid) configuration which provides, in principle, perfect on-axis images. This design exhibits no spherical aberration on-axis but suffers from field curvature, coma and astigmatism, therefore the angular resolution degrades rapidly with increasing off-axis angles. Different mirror designs exist in which the primary and secondary mirror profiles are expanded as a power series in order to increase the angular resolution at large off-axis positions. Here we present the design and global trade off study of an X-ray mirror systems based on polynomial optics in view of the Wide Field X-ray Telescope (WFXT) mission. WFXT aims at performing an extended cosmological survey in the soft X-ray band with unprecedented flux sensitivity. To achieve these goals the angular resolution required for the mission is very demanding, of 5 arcsec HEW resolution goal to be achieved across a 1-deg field of view, in addition an effective area of 5-9000 cm(2) at 1 keV is needed.

引用

页数：10

共 50 条

[41] Towards an Optimal Trade-off of Viterbi Decoder Design
He, Jinjin
Wang, Zhongfeng
Cui, Zhigiang
Li, Li
ISCAS: 2009 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1-5, 2009, : 3030 - +
[42] COVERAGE AS A TRADE-OFF ISSUE IN SYSTEM ARCHITECTURAL DESIGN
GODDARD, PL
AIAA COMPUTERS IN AEROSPACE VII CONFERENCE, PTS 1 AND 2: A COLLECTION OF PAPERS, 1989, : 761 - 766
[43] Trade-off decision making in user interface design
Swinburne Univ of Technology, Hawthorn
Behav Inf Technol, 2 (98-109):
[44] TECHNICAL TRADE-OFF ISSUES IN CLEAN ROOM DESIGN
ISAAC, RD
ECONOMOS, JT
MARTON, MB
SEWELL, FA
LYNCH, MW
SOLID STATE TECHNOLOGY, 1986, 29 (12) : 53 - 58
[45] Piston Design for Optimizing Trade-off of Friction and NVH
Jay, Alastair
Deighan, Thomas
Kato, Nozomu
Sato, Kiyofumi
SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS, 2016, 9 (03): : 1125 - 1135
[46] TRADE-OFF ANALYSES IN MAJOR INTERCHANGE DESIGN.
Taylor, James I.
Highway Research Record, 1973, (432): : 52 - 60
[47] Recoverable mobile environment: Design and trade-off analysis
Pradhan, DK
Krishna, P
Vaidya, NH
PROCEEDINGS OF THE TWENTY-SIXTH INTERNATIONAL SYMPOSIUM ON FAULT-TOLERANT COMPUTING, 1996, : 16 - 25
[48] Performance and Robustness Trade-off in Disturbance Observer Design
Sariyildiz, Emre
Ohnishi, Kouhei
39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 3681 - 3686
[49] TRADE-OFF ANALYSIS EASES DESIGN OF PRINT CONTROLLER
CARRINGTON, JE
WESTCOTT, GR
COMPUTER DESIGN, 1985, 24 (07): : 135 - &
[50] Trade-off decision making in user interface design
Howard, S
BEHAVIOUR & INFORMATION TECHNOLOGY, 1997, 16 (02) : 98 - 109

← 1 2 3 4 5 →