Automatic data processing and defect detection in time-of-flight diffraction images using statistical techniques

Ultrasonic Time-of-Flight Diffraction (TOFD) has proved highly effective for the inspection of welds, providing at accurate positioning and sizing of defects. Currently, Most TOFD data interpretation is performed off-line by a trained operator anti using interactive software aids. This processing is highly dependent on operator experience, alertness and consistency and is cumbersome and time-consuming. Results typically suffer from inconsistency, and slight inaccuracies, particularly when dealing with large volumes of data. The recent trend in the related disciplines of remote sensing p and medical imaging is to automate the data processing and interpretation process as jar as possible, relieving the expert to some event of unnecessary or repetitive tasks. It is anticipated that TOFD interpretation could benefit from such automation, improving the interpretation procedures by adding an element of robustness' accuracy and consistency. This can be achieved by discriminating between subtle variations in visual and spectral properties of the data, resulting in savings in time, effort and cost. This paper presents a scheme for the automatic processing of TOFD data and detection of weld defects as part of a comprehensive TOFD inspection and interpretation aid. A number of signal and image processing tools have been specifically adapted for use with ultrasonic TOFD data and developed to function autonomously without the need for continuous intervention. It is hoped this will form the basis for a new paradigm in ultrasonics for fully automatic batch processing and interpretation.