Porosity, microstructure and mechanical behavior of NiO-YSZ composite anode for solid oxide fuel cells

In this study, NiO-yttria stabilized zirconia (YSZ) composite anodes were prepared by using ball-milling followed by a sintering process. For this purpose, two different weight percent ratios of NiO and YSZ powders (50 : 50 and 60 : 40) were mixed by the cost-effective ball-milling method. The morphology and particle size distribution of the mixed powders were investigated using scanning electron microscopy and dynamic light scattering methods, respectively. The powders were then uniaxially pressed to form pellets with a thickness and diameter of around 1 and 22 mm, respectively. Sintering of the pellets was conducted at 1 100 degrees C and the microstructure and porosity, as well as phase analysis of bulk composites, were then investigated using scanning electron microscopy and X-ray diffraction, respectively. More importantly, the microhardnesses of the prepared pellets were obtained and compared with literature values to evaluate the accuracy of the sintering process. The results showed that the open porosity of the samples varied between 30 to 40 percent, which makes them suitable for anode application in solid oxide fuel cells. The prepared NiO-YSZ composites with a uniform distribution of Ni particles showed a value of microhardness above 0.5 GPa, and these results were discussed in detail.