Wear resistance of laser cladded Stallite 31 coating on AISI 316L steel

被引：9

作者：

Kittivitayakul, Pisit ^{[2
,3
]}

Khamwannah, Jirapon ^{[1
]}

Juijerm, Patiphan ^{[4
]}

Lothongkum, Anchaleeporn Waritswat ^{[5
]}

Lothongkum, Gobboon ^{[6
]}

机构：

[1] Chulalongkorn Univ, Dept Met Engn, Fac Engn, Bangkok 10330, Thailand

[2] Chulalongkorn Univ, Dept Met Engn, Bangkok, Thailand

[3] Five Tiger Engn, Songkhla, Thailand

[4] Kasertsart Univ, Dept Mat Engn, Fac Engn, Bangkok, Thailand

[5] King Mongkuts Inst Technol Ladkrabang, Bangkok, Thailand

[6] Chulalongkorn Univ, Fac Engn, Dept Met Engn, Innovat Met Res Unit, Bangkak, Thailand

来源：

MATERIALS TESTING | 2018年 / 60卷 / 10期

关键词：

Wear; laser cladding; Stellite; 31; AISI; 316L;

D O I：

10.3139/120.111239

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Laser cladding of Stellite 31 powder on AISI 316L plate size of 50 x 50 x 25 mm using diode laser powers of 3.5, 4.0, 4.5 and 5.0 kW was produced. The wear tests of clad layers were investigated according to ASTM G99. Equiaxed and elongated grains were found in clad layer using laser powers of 3.5, 4.0 kW and 4.0, 5.0 kW, respectively. Compressive residual stress was detected at the surface of the clad layers. They decreased as laser power increased. After polishing, compressive residual stress and the wear resistance of the clad layers subjected to higher laser power were higher than those subjected to lower laser power. The friction coefficient of the clad layer subjected to higher laser power was lower than that subjected to lower laser power.

引用

页码：969 / 973

页数：5

共 50 条

[21] Microstructural Evolution and Wear Resistance of Surface Alloyed AISI 316L Stainless Steel with Equi-atomic CoCrFeMnTi by Continuous Wave Diode Laser
Krishna, Shree
Manna, Indranil
Glushych, Viktor
Weisheit, Andreas
Majumdar, Jyotsna Dutta
OPTICS AND LASER TECHNOLOGY, 2024, 179
[22] Tribological Properties of Surface Friction Hardened AISI 316L Steel
Khaksaran, A.
Taghiabadi, R.
Jafarzadegan, M.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (08) : 1979 - 1989
[23] Fracture behavior of laser-clad joint of Stellite 21 on AISI 316L stainless steel
Ganesh, P.
Moitra, A.
Tiwari, Pragya
Sathyanarayanan, S.
Kumar, Harish
Rai, S. K.
Kaul, Rakesh
Paul, C. P.
Prasad, R. C.
Kukreja, L. M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17): : 3748 - 3756
[24] Effect of thermal characteristics on distortion in laser cladding of AISI 316L
Yan, Zhaorui
Liu, Weiwei
Tang, Zijue
Liu, Xuyang
Zhang, Nan
Wang, Zhenqiu
Zhang, Hongchao
JOURNAL OF MANUFACTURING PROCESSES, 2019, 44 (309-318) : 309 - 318
[25] Studies on Direct Laser Cladding of SiC Dispersed AISI 316L Stainless Steel
Majumdar, Jyotsna Dutta
Li, Lin
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (12): : 3001 - 3008
[26] Additive Manufacturing of AISI 316L Stainless Steel: A Review
D'Andrea, Danilo
METALS, 2023, 13 (08)
[27] Effect of Ultrasonic Cleaning after Laser Texturizing of Surface of AISI 316L Steel on the Degree of Wetting and Corrosion Resistance
Dasaev, Marat
Kalakutskaya, Olga
Zilova, Olga
Mednikov, Alexey
COATINGS, 2023, 13 (12)
[28] Linear friction welding of AISI 316L stainless steel
Bhamji, Imran
Preuss, Michael
Threadgill, Philip L.
Moat, Richard J.
Addison, Adrian C.
Peel, Matthew J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 528 (02): : 680 - 690
[29] Nano- and Micromechanical Parameters of AISI 316L Steel
Grabco, D.
Shikimaka, O.
Pyrtsac, C.
Barbos, Z.
Popa, M.
Prisacaru, A.
Vilotic, D.
Vilotic, M.
Aleksandrov, S.
SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2020, 56 (06) : 719 - 726
[30] Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application
Jyotsna Dutta Majumdar
Arun Kumar
Sisa Pityana
I. Manna
Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 2018, 88 : 387 - 403

← 1 2 3 4 5 →