Increasing Energy-harvesting ability of piezoelectric unimorph cantilevers using Spring Supports

被引：3
|
作者：
Kim, Kyung Bum [1 ]
Nahm, San [1 ]
Sung, Tae Hyun [2 ]
Paik, Jong Hoo [3 ]
Kim, Hyoung Jae [4 ]
机构：
[1] Korea Univ, Dept Mat Sci & Engn, Seoul 02841, South Korea
[2] Hanyang Univ, Dept Elect Engn, Seoul 04763, South Korea
[3] Korea Inst Ceram Engn & Technol, Elect & Mat Ceram Div, Seoul 08516, South Korea
[4] Korea Inst Ind Technol, Dongnam Div, Busan 46742, South Korea
来源：
JOURNAL OF THE KOREAN PHYSICAL SOCIETY | 2016年 / 68卷 / 11期
关键词：
Piezoelectric; Energy-harvesting; Spring; Unimorph Cantilevers; THICK-FILMS; SENSOR;
D O I：
10.3938/jkps.68.1262
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
We fabricated a spring-supported piezoelectric unimorph cantilever (SPUC) with enhanced energy-harvesting characteristics by using a 0.69Pb(Zr0.47Ti0.53)O-3-0.31Pb(Ni0.6Zn0.4)(1/3)Nb-2/3)O-3 + CuO (0.5 mol%) thick film sintered at 950 A degrees C; a spring having a spring constant of 14,320 N/m was used as the cantilever support. The SPUC could generate an output power as high as 29 mW with a spring constant of 14,320 N/m across a resistance of 150 k Omega; this corresponded to a power density of 34 mW/cm(3). We, therefore, that the thus-fabricated SPUCs when supported by a spring can harvest increased levels of energy.
引用
收藏
页码：1262 / 1266
页数：5
相关论文
共 50 条
  • [21] Design methodology of piezoelectric energy-harvesting skin using topology optimization
    A. Takezawa
    M. Kitamura
    S.L. Vatanabe
    E. C. N. Silva
    Structural and Multidisciplinary Optimization, 2014, 49 : 281 - 297
  • [22] Finite element analysis of a unimorph cantilever for piezoelectric energy harvesting
    Wang, Qingping
    Pei, Xuebing
    Wang, Qi
    Jiang, Shenglin
    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2012, 40 (04) : 341 - 351
  • [23] Enhanced energy harvesting performance of the piezoelectric unimorph with perpendicular electrodes
    Ma, Ming
    Xia, Song
    Li, Zhenrong
    Xu, Zhuo
    Yao, Xi
    APPLIED PHYSICS LETTERS, 2014, 105 (04)
  • [24] Design methodology of piezoelectric energy-harvesting skin using topology optimization
    Takezawa, A.
    Kitamura, M.
    Vatanabe, S. L.
    Silva, E. C. N.
    STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2014, 49 (02) : 281 - 297
  • [25] Vibtrational energy harvesting using photo-patternable piezoelectric nanocomposite cantilevers
    Prashanthi, K.
    Miriyala, N.
    Gaikwad, R. D.
    Moussa, W.
    Rao, V. Ramgopal
    Thundat, T.
    NANO ENERGY, 2013, 2 (05) : 923 - 932
  • [26] Equivalent circuit model of piezoelectric vibration energy harvesters composed of trapezoidal unimorph cantilevers
    Umegaki, Toshihito
    Ito, Takashi
    Tan, Goon
    Kanno, Isaku
    18TH INTERNATIONAL CONFERENCE ON MICRO AND NANOTECHNOLOGY FOR POWER GENERATION AND ENERGY CONVERSION APPLICATIONS, 2019, 1407
  • [27] Development of piezoelectric energy-harvesting tuned mass damper
    PAN Peng
    ZHANG DongBin
    NIE Xin
    CHEN HaoWen
    Science China(Technological Sciences) , 2017, (03) : 467 - 478
  • [28] Development of piezoelectric energy-harvesting tuned mass damper
    Pan, Peng
    Zhang, DongBin
    Nie, Xin
    Chen, HaoWen
    SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2017, 60 (03) : 467 - 478
  • [29] NUMERICAL AND EXPERIMENTAL STUDY ON ENERGY-HARVESTING PIEZOELECTRIC FLAGS
    Xia, Yifan
    Michelin, Sebastien
    Doare, Olivier
    PROCEEDINGS OF THE ASME 34TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, 2015, VOL 9, 2015,
  • [30] Influence of the Motion of a Spring Pendulum on Energy-Harvesting Devices
    Abohamer, Mohamed K.
    Awrejcewicz, Jan
    Starosta, Roman
    Amer, Tarek S.
    Bek, Mohamed A.
    APPLIED SCIENCES-BASEL, 2021, 11 (18):
12345