Nonlinear Finite Element Analysis of the Bearing Capacity of a New Type of Column under Axial Load

被引：1
|
作者：
Xu Yafeng [1 ]
Zhao Xin [1 ]
Fu Yi [1 ]
机构：
[1] Shenyang Jianzhu Univ, Sch Civil Engn, Shenyang 110168, Peoples R China
来源：
ADVANCES IN CIVIL ENGINEERING, PTS 1-6 | 2011年 / 255-260卷
关键词：
CFRP; STCC-SRC; Finite element analysis; Axial load;
D O I：
10.4028/www.scientific.net/AMR.255-260.45
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Based on experimental research, the bearing performance of the new column (steel tube-reinforced concrete composite columns combination strengthened with angle steel and CFRP) has been studied in detail by finite element method. A finite element model is established based on a series of assumption. The load-displacement curves are obtained. The influence of steel ratio and thickness of CFRP layers to the bearing capacity is analyzed too. The result shows that both the steel ratio and the thickness of CFRP layers have great contribution to the axial load capacity. The finite element analysis results and theoretical analysis which are in good agreement show that simulation results are generally right.
引用
收藏
页码：45 / 48
页数：4
相关论文
共 50 条
  • [21] Finite element analysis on bridge bearing load cell
    Yang, Zhaojian
    Wang, Qinxian
    Xie, Youbai
    Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement & Diagnosis, 2000, 20 (SUPPL.): : 76 - 79
  • [22] Analysis of the column bearing capacity with lateral load in precipitator casing
    Wang, Ning
    Lu, Tong
    Xing, Kai-Li
    Wang, Deng-Feng
    MECHANICS AND ARCHITECTURAL DESIGN, 2017, : 82 - 88
  • [23] Nonlinear Finite Element Analysis of Frames Under Interval Material and Load Uncertainty
    Muhanna, Rafi L.
    Mullen, Robert L.
    Rao, M. V. Rama
    ASCE-ASME JOURNAL OF RISK AND UNCERTAINTY IN ENGINEERING SYSTEMS PART B-MECHANICAL ENGINEERING, 2015, 1 (04):
  • [24] Finite Element Analysis of Load Bearing Capacity of a Reinforced Concrete Frame Subjected to Cyclic Loading
    Bamdad, Mahdi
    Moghadam, Abdolreza Sarvghad
    Mehrani, Mohamad Javad
    CIVIL ENGINEERING JOURNAL-TEHRAN, 2016, 2 (05): : 221 - 225
  • [25] Finite element analysis on gas load-bearing capacity of belt pneumatic cushion conveyer
    Li, Yuanke
    Run Hua Yu Mi Feng/Lubrication Engineering, 2000, (05): : 14 - 16
  • [26] Analysis on Load Bearing Capacity of Column with Different Diameters of Steel Tube under Horizontal Displacement
    Xu, Yafeng
    Zhang, Li
    Song, Jian
    ADVANCES IN CIVIL ENGINEERING AND ARCHITECTURE INNOVATION, PTS 1-6, 2012, 368-373 : 838 - 841
  • [27] On Load Paths and Load Bearing Topology from Finite Element Analysis
    Kelly, D.
    Reidsema, C.
    Lee, M.
    9TH WORLD CONGRESS ON COMPUTATIONAL MECHANICS AND 4TH ASIAN PACIFIC CONGRESS ON COMPUTATIONAL MECHANICS, 2010, 10
  • [28] Nonlinear Finite Element Analysis of Dented Pipes Under Internal Pressure and Axial Loads
    Murugathasan, Parththeeban
    Muntakim, Abu Hena
    Dhar, Ashutosh Sutra
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (ICME2019), 2021, 2324
  • [29] Finite Element Modelling and Analysis of Axial Active Magnetic Bearing
    Saha, Sudipta
    Nabi, M.
    2018 IEEE 13TH INTERNATIONAL CONFERENCE ON INDUSTRIAL AND INFORMATION SYSTEMS (IEEE ICIIS), 2018, : 432 - 435
  • [30] Finite element analysis of steel beam and concrete-filled circular column joints bearing capacity
    Su F.
    Jiang Y.
    Cai Y.-C.
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2010, 44 (10): : 1876 - 1882+1889
12345