FORMATION OF AlFeSi PHASE IN AlSi12 ALLOY WITH Ce ADDITION

被引：0
|
作者：
Kores, S. [1 ]
Voncina, M. [1 ]
Kosec, B. [1 ]
Medved, J. [1 ]
机构：
[1] Univ Ljubljana, Fac Nat Sci & Engn, Ljubljana, Slovenia
来源：
METALURGIJA | 2012年 / 51卷 / 02期
关键词：
Al-Si alloys; cerium; beta-AlFeSi phase;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The influence of cerium addition on the solidification sequence and microstructure constituents of the Al-Si alloys with 12,6 mass % Si was examined. The solidification was analyzed by a simple thermal analysis. The microstructures were examined with conventional light and scanning electron microscopy. Ternary AlSiCe phase was formed in the Al-Si alloys with added cerium during the solidification process. AlSiCe and beta-AlFeSi phases solidified together in the region that solidified the last. Cerium addition influenced on the morphology of the alpha-AlFeSi phase solidification.
引用
收藏
页码：216 / 220
页数：5
相关论文
共 50 条
  • [1] MECHANICAL PROPERTIES OF AlSi12 ALLOY WITH ALUMINIUM BRONZE
    Lipinski, Tomasz
    16TH INTERNATIONAL SCIENTIFIC CONFERENCE: ENGINEERING FOR RURAL DEVELOPMENT, 2017, : 1064 - 1068
  • [2] The effects of pressure during the crystallization on properties of the alsi12 alloy
    Pastirčák R.
    Ščury J.
    Moravec J.
    Archives of Foundry Engineering, 2017, 17 (03) : 103 - 106
  • [3] Mechanical pretreatment before electroplating of aluminium alloy AlSi12
    Uhlmann, E.
    Jaczkowski, R.
    SURFACE & COATINGS TECHNOLOGY, 2018, 352 : 483 - 488
  • [4] Vacuum Foaming Fabricating Processing of AlSi12 Alloy Foam
    Yang Hao
    Zuo Xiaoqing
    Wang Jun
    Lu Jiansheng
    Zhou Yun
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (11) : 2992 - 2998
  • [5] Creation of AlSi12 Alloy Coating by Centrifugal Induction Surfacing with the Addition of Low-Melting Metals
    Komarov, Aleksander I.
    Kyziol, Leslaw
    Orda, Dmitry V.
    Iskandarova, Donata O.
    Sosnovskiy, Igor A.
    Kurilyonok, Artem A.
    Zuk, Daria
    MATERIALS, 2021, 14 (13)
  • [6] Analysis of the machining characteristics in reaming AlSi12 alloy with PCD reamer
    Yan, Xiangping
    Li, Bin
    Li, Jianru
    Yang, Lei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (9-12): : 2387 - 2399
  • [7] Semi-continuous casting and microstructure investigation of the AlSi12 alloy
    Kazup, Agota
    Karpati, Viktor
    Hegedus, Balazs
    Gacsi, Zoltan
    12TH HUNGARIAN CONFERENCE ON MATERIALS SCIENCE (HMSC12), 2020, 903
  • [8] Influence of Ag content on microstructure and intermetallic phases of AlSi12 alloy
    Turker, A.
    Saklakoglu, N.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2013, 26 (03) : 129 - 133
  • [9] Analysis of the machining characteristics in reaming AlSi12 alloy with PCD reamer
    Xiangping Yan
    Bin Li
    Jianru Li
    Lei Yang
    The International Journal of Advanced Manufacturing Technology, 2013, 69 : 2387 - 2399
  • [10] Effect of Mg addition on microstructure and mechanical properties of AlSi12 alloy produced by high-pressure casting method
    Aksoy, Samet
    Kabakci, Fikret
    Acarer, Mustafa
    Duzcukoglu, Hayrettin
    Unuvar, Erdem
    Findik, Fehim
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2023, 75 (01) : 27 - 35
12345