A beam finite element based on layerwise trigonometric shear deformation theory

被引：60
作者：
Shimpi, RP [1 ]
Ainapure, AV [1 ]
机构：
[1] Indian Inst Technol, Dept Aerosp Engn, Bombay 400076, Mumbai, India
来源：
COMPOSITE STRUCTURES | 2001年 / 53卷 / 02期
关键词：
beam finite element; laminated beam; layerwise theory; shear deformation;
D O I：
10.1016/S0263-8223(00)00186-0
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A simple one-dimensional beam finite element, based on layerwise trigonometric shear deformation theory, is presented. The element has two nodes and only three degrees of freedom per node. Yet, it incorporates through the thickness sinusoidal variation of in-plane displacement such that shear-stress free boundary conditions on the top and bottom surfaces of the beam element are satisfied and the shear-stress distribution is realistic in nature. Constitutive relations between shear-stresses and shear-strains are satisfied in all the layers, and, therefore, shear correction factor is not required. Compatibility at the layer interface in respect of inplane displacement is also satisfied. It is to be noted that the element developed is free from sheer locking. The results obtained are accurate and show good convergence. Unlike many other elements, transverse shear-stresses are evaluated directly using constitutive relations. The efficacy of the present element is demonstrated through the examples of static flexure and free vibration. (C) 2001 published by Elsevier Science Ltd.
引用
收藏
页码：153 / 162
页数：10
相关论文
共 50 条
  • [31] A refined of trigonometric shear deformation plate theory based on neutral surface position is proposed for static analysis of FGM plate.
    Mohamed, Merazi
    Abdelouahed, Tounsi
    Slimane, Merdaci
    1ST MEDITERRANEAN CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (MEDFRACT1), 2020, 26 : 129 - 138
  • [32] Critical Buckling Load Analysis Of Porous Orthotropic Two-Layered Cylindrical Panels Based on Trigonometric Shear Deformation Theory
    Ferruh Turan
    Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2025, 49 (3) : 2803 - 2819
  • [33] Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory
    Thai, Chien H.
    Ferreira, A. J. M.
    Bordas, S. P. A.
    Rabczuk, T.
    Nguyen-Xuan, H.
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2014, 43 : 89 - 108
  • [34] Analysis of functionally graded sandwich and laminated shells using a layerwise theory and a differential quadrature finite element method
    Liu, Bo
    Ferreira, A. J. M.
    Xing, Y. F.
    Neves, A. M. A.
    COMPOSITE STRUCTURES, 2016, 136 : 546 - 553
  • [35] Static and dynamic analyses of laminated plates using a layerwise theory and a radial basis function finite element method
    Xing, Y. F.
    Wu, Yang
    Liu, Bo
    Ferreira, A. J. M.
    Neves, A. M. A.
    COMPOSITE STRUCTURES, 2017, 170 : 158 - 168
  • [36] A fiber beam element for the finite particle method considering shear and torsion deformaton
    Lin X.-H.
    Luo Y.-Z.
    Tang J.-Z.
    Wang W.
    Zheng Y.-F.
    Yang C.
    Gongcheng Lixue/Engineering Mechanics, 2022, 39 (05): : 34 - 43
  • [37] A generalized layerwise finite element for multi-layer damping treatments
    R. A. S. Moreira
    J. D. Rodrigues
    A. J. M. Ferreira
    Computational Mechanics, 2006, 37 : 426 - 444
  • [38] A generalized layerwise finite element for multi-layer damping treatments
    Moreira, RAS
    Rodrigues, JD
    Ferreira, AJM
    COMPUTATIONAL MECHANICS, 2006, 37 (05) : 426 - 444
  • [39] The Element Stiffness Matrix of a Tapered Beam with Effects of Shear Deformation and its Stability Application
    Lu, Nianli
    Meng, Lixia
    ADVANCED DESIGN TECHNOLOGY, PTS 1-3, 2011, 308-310 : 1383 - 1388
  • [40] Flexure of cross-ply laminated plates using equivalent single layer trigonometric shear deformation theory
    Sayyad, Atteshamuddin S.
    Ghugal, Yuwaraj M.
    STRUCTURAL ENGINEERING AND MECHANICS, 2014, 51 (05) : 867 - 891
12345