Incompressible model of solids conveying in a single-screw extruder

Experiments in corn meal extrusion [18] have shown that the flow of solids in the screw channel of a single-screw extruder has a helical pattern. This observation implies that there is a cross-channel velocity component in the solids conveying zone of the extruder. Existing solids conveying models [2,5,6,9] treat the solids moving in the channel as a plug flow without a cross-channel velocity component. The two-dimensional powder conveying model proposed in this paper contains both a down-channel component and a cross-channel component. The stress generating mechanism is much more complicated in a powder flow than in a fluid flow. The incompressible model incorporates a constitutive equation for the powder flow with slip boundary conditions. The energy equation with appropriate boundary conditions is also included in the model. The numerically solved model shows that the predicted down-channel pressure development, velocity and temperature distributions are all reasonable.